Retrofit Automatic Light control

[larcho]

I own a 2019 Polo Comfortline fabricated in Brasil, I know a few components are probably different from the Euro version but I'm thinking there shouldn't be too many differences. I'd like to add automatic light control to my Polo.
I've seen a lot of these aftermarket solutions that come with an integrated light sensor, but I'd like to go to something more factory set:
I checked my light switch knob and it seems it's the older/classic kind of switch with the big connector, which makes me believe the lights are not controlled by the BCM, so for starters, I need to upgrade/move the lights to be controlled by the BCM, is this even possible?

Thanks in advance!

[larcho]

Just to shed some more light to my current situation. My BCM model number is: 2QW937090A, fabricated in Mexico, I assume these are used throughout South America.
The 090 at the end gives me a bit of hope as it's of my understanding that the 90 there should stand for the most equipped version. BUT I notice that the 3rd socked (C) is not connected and empty (without pins).

By the way, I just found this post: https://www.team-bhp.com/forum/diy-do-y ... alled.html he seemed to successfully move the light control to the BCM. Does Ciclo still provide wiring support?

[OomStu_ZA]

I'd like to assist but cannot, sorry. At least there is one reply

[albob]

is this thread any good to your ??


viewtopic.php?f=41&t=73355&hilit=automatic+light

[larcho]

is this thread any good to your ??


viewtopic.php?f=41&t=73355&hilit=automatic+light

Just read there that Ciclo doesn't fabricate the wirings anymore