I just got it off ebay a while ago mate.
Clive's new Polo
-
- Silver Member
- Posts: 276
- Joined: Mon Jun 25, 2018 10:56 am
- Drives: Polo SEL 1.0 TSI 115PS
- Location: North Yorkshire
-
- Bling Bling Diamond Member
- Posts: 3541
- Joined: Sun Oct 11, 2015 9:40 pm
- Drives: 2020 AW Polo GTI+, Pure White.
- Location: UK
Re: Clive's new Polo
A google search for ‘double sided tape for car number plates’ and you should find what you want.mjsaville wrote: ↑Fri Mar 20, 2020 10:20 pmWhere did you source the double sided tape from?POLO Clive wrote: ↑Thu Mar 19, 2020 11:22 am First modification, new number plates stuck on with double-sided tape (I hate them attached with screws), and the front one cut down by approximately 15mm to fit properly in the bumper recess.
Polo number plate modification.jpg
MJ
-
- Getting There!
- Posts: 88
- Joined: Sat Aug 03, 2019 10:47 pm
- Drives: Limestone Grey GTI+ (Finallly arrived)
- Location: Aberdeen, Scotland
Re: Clive's new Polo
Superb, thanks for that.....SRGTD wrote: ↑Sat Mar 21, 2020 9:23 amA google search for ‘double sided tape for car number plates’ and you should find what you want.mjsaville wrote: ↑Fri Mar 20, 2020 10:20 pmWhere did you source the double sided tape from?POLO Clive wrote: ↑Thu Mar 19, 2020 11:22 am First modification, new number plates stuck on with double-sided tape (I hate them attached with screws), and the front one cut down by approximately 15mm to fit properly in the bumper recess.
Polo number plate modification.jpg
MJ
MJ
Re: Clive's new Polo
I tend to use the 3M versions. I had used cheaper ebay specials a few years age and the number plate gradually started to slide off during the summer and i didnt notice the front plate had fallen off until after I got pulled over for itmjsaville wrote: ↑Fri Mar 20, 2020 10:20 pmWhere did you source the double sided tape from?POLO Clive wrote: ↑Thu Mar 19, 2020 11:22 am First modification, new number plates stuck on with double-sided tape (I hate them attached with screws), and the front one cut down by approximately 15mm to fit properly in the bumper recess.
Polo number plate modification.jpg
MJ