Is this engine noise normal (sound file incl.)

Chat about your 2018+ AW/BZ model Polos here!
Post Reply
Harrihealey02
Silver Member
Posts: 250
Joined: Sun Dec 23, 2018 12:33 pm
Drives: 2018 SEL
Location: Essex

Is this engine noise normal (sound file incl.)

Post by Harrihealey02 »

When starting the car today I noticed as it’s cold it idles around 1k and I could hear a vibration noise that I don’t usually hear. https://filebin.net/dpl2b2t05pkgbqee

Listen to 3 seconds when I increase revs to 1k when you can hear it. It doesn’t happen at 700rpm, only from around 1k and then goes away above 1.1k.

Could it be the alternator, or loose underbody cladding which is vibrating at a certain frequency?
Harrihealey02
Silver Member
Posts: 250
Joined: Sun Dec 23, 2018 12:33 pm
Drives: 2018 SEL
Location: Essex

Re: Is this engine noise normal (sound file incl.)

Post by Harrihealey02 »

I think I found what’s causing the noise. Is there meant to be a screw or fixture in this black hole?
Attachments
Looks like a screw is missing in the black hole?
Looks like a screw is missing in the black hole?
31A2E36D-79CC-48F1-A211-31601676D881.png (3.97 MiB) Viewed 521 times
Harrihealey02
Silver Member
Posts: 250
Joined: Sun Dec 23, 2018 12:33 pm
Drives: 2018 SEL
Location: Essex

Re: Is this engine noise normal (sound file incl.)

Post by Harrihealey02 »

Update - found the cause.

If anyone experiences a metallic vibration noise under the car, it is the exhaust heat shield above the rear bend of the exhaust pipe where the heatshield spreads out towards the front of the fuel tank. I bended mine slightly and the noise stopped.
Harrihealey02
Silver Member
Posts: 250
Joined: Sun Dec 23, 2018 12:33 pm
Drives: 2018 SEL
Location: Essex

Re: Is this engine noise normal (sound file incl.)

Post by Harrihealey02 »

9803DB6A-6B15-4EC5-9341-4A6C6E781CAF.jpeg
9803DB6A-6B15-4EC5-9341-4A6C6E781CAF.jpeg (111.05 KiB) Viewed 431 times
Post Reply