Hi all,
Hope you are well.
Currently having issues with my 2003 1.4 tdi.
Recently its had trouble starting, assumed it was the battery and had it changed. Still has the same fault.
Then the glow plug light began to flash with the engine management light fixed on. This caused the starting issue to be worse and now cuts out whilst driving too.
Read with my code reader and it came up with codes:
P3007 - Camshaft Position Sensor (G40): No Signal - intermittent
P0341 - Camshaft Position Sensor (G40)
P0322 - Engine Speed Sensor (G28)
Anyone know of these faults or had them repaired?
Any help is appreciated.
Kind regards,
Starting and driving problems.Codes P3007, P0341, P0322
Re: Starting and driving problems.Codes P3007, P0341, P0322
Need help with this, anyone know of anything about this?
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Starting and driving problems.Codes P3007, P0341, P0322
Could be a bad engine earth
-
- New
- Posts: 6
- Joined: Wed Jul 14, 2021 7:06 pm
- Drives: 9n
- Location: London
Re: Starting and driving problems.Codes P3007, P0341, P0322
Hello buddy,
I have a VW Polo 1.4 TDI AMF same as yours, with the same symptoms and errors. Did you manage to fix the problems? What was the solution to fix it? Thank you!
I have a VW Polo 1.4 TDI AMF same as yours, with the same symptoms and errors. Did you manage to fix the problems? What was the solution to fix it? Thank you!
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Starting and driving problems.Codes P3007, P0341, P0322
You’ll need the errors from VCDS as these sensors can fail in multiple ways