Hi all!
I am in the process of adding remote central locking to my polo I have established how this is done (replacing the comfort control module located above the clutch pedal) but I am not sure which model to replace it with. The one I currently have is the 6QO 959 433 G and doing a quick search on ebay for 6QO 959 433(no letter) gives results with "E" and "H" on the end.
I was wondering is someone would be able to tell me which one has the remote central locking feature.
Thanks in advance!!
Comfort control module
Re: Comfort control module
Hi Someone123
I too am trying to do this modification.. but.. I can see where the box should go above the Clutch pedal..
https://www.dpreview.com/galleries/7292 ... ct-removed
help..anyone?
Wen I have this information I'm going to do a YTube video and hopefully this would help someone else
Thanks
I too am trying to do this modification.. but.. I can see where the box should go above the Clutch pedal..
https://www.dpreview.com/galleries/7292 ... ct-removed
help..anyone?
Wen I have this information I'm going to do a YTube video and hopefully this would help someone else
Thanks
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Comfort control module
https://www.ebay.co.uk/sch/i.html?_odkw ... E&_sacat=0
You need an E
heres the guide for fitting
http://www.volkszone.com/VZi/showthread.php?t=974122
You need an E
heres the guide for fitting
http://www.volkszone.com/VZi/showthread.php?t=974122
Re: Comfort control module
Many thanks for your fast reply..
I have seen this information before
I'm still not sure how you get the 'old' one out. From my photo it seems to be inside a holder but can't see plugs etc. Apart from the removal over the heater ducting I can't see how you do this job and no one seems to detail it enough (for me anyway.. is the casing around the existing unit removable perhaps?
The controller I have has two sockets.; one larger than the other. My CCU was off an identical Polo 9N3.. year/model etc so I'm hoping it should work as others have said/done.
I have the flip key cut ( from a photo!) and am using my original transponder; this works fine in the locks and starting the engine.
any more help is much appreciated
Thanks
I have seen this information before
I'm still not sure how you get the 'old' one out. From my photo it seems to be inside a holder but can't see plugs etc. Apart from the removal over the heater ducting I can't see how you do this job and no one seems to detail it enough (for me anyway.. is the casing around the existing unit removable perhaps?
The controller I have has two sockets.; one larger than the other. My CCU was off an identical Polo 9N3.. year/model etc so I'm hoping it should work as others have said/done.
I have the flip key cut ( from a photo!) and am using my original transponder; this works fine in the locks and starting the engine.
any more help is much appreciated
Thanks
Re: Comfort control module
Hi again..
I'm posting a photo to hopefully jog someones memory on how to get the old Unit out and get the CCU in
https://www.dpreview.com/galleries/7292 ... ccu-unit-2
The old unit Blue spot.. seems to be inside a case.. Red Line
I removed the heater ducting and the switch over the clutch pedal. This is driving me nuts.. I'm inches away from using the new unit but stumped.. I agree access is very restricted.. on person said it 'was a bit of a headache' to remove but I can't see any way to get it out.
Help, please?
many thanks
I'm posting a photo to hopefully jog someones memory on how to get the old Unit out and get the CCU in
https://www.dpreview.com/galleries/7292 ... ccu-unit-2
The old unit Blue spot.. seems to be inside a case.. Red Line
I removed the heater ducting and the switch over the clutch pedal. This is driving me nuts.. I'm inches away from using the new unit but stumped.. I agree access is very restricted.. on person said it 'was a bit of a headache' to remove but I can't see any way to get it out.
Help, please?
many thanks
Re: Comfort control module
Hi
Did you manage to do this ?
I’m about to do it too - and like you the instructions seem light on this bit, so do the online workshop manuals.
Lying on my back in the footwell - I can’t even see it. At the moment the only plan seems to be to start removing trim until it appears!
Any help and or lessons learned would be welcome ...
Did you manage to do this ?
I’m about to do it too - and like you the instructions seem light on this bit, so do the online workshop manuals.
Lying on my back in the footwell - I can’t even see it. At the moment the only plan seems to be to start removing trim until it appears!
Any help and or lessons learned would be welcome ...