V68 flap control motor - connector type

Chat about your 9n Polo (inc GT and Fun)
Post Reply
littlepolo
Gold Member
Posts: 778
Joined: Thu Jul 21, 2011 9:47 pm

V68 flap control motor - connector type

Post by littlepolo »

Is there any way to confirm the connector type (square or oval plug) based on model year or can I only be sure once the unit is removed?

I've found some with square plug covering various model years, and some with oval plug stating mark IV only.
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: V68 flap control motor - connector type

Post by alexperkins »

Youll need to see whats fitted, and get the part number off it to be 100%

PM me your reg number and ill see what your car should have against ETKA
littlepolo
Gold Member
Posts: 778
Joined: Thu Jul 21, 2011 9:47 pm

Re: V68 flap control motor - connector type

Post by littlepolo »

pm sent, thanks.

There are some new units manufactured by Hella which are half the price of the new VW part. Probably a better option than a used unit off eBay that might give up at some stage after doing all that work?
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: V68 flap control motor - connector type

Post by alexperkins »

6Q0907511 is the correct part number for your car. This has an oval plug

The hella ones ive found are matching to 6Q0907511C which is for later chassis numbers than yours, and take the rectangular plug
RUM4MO
Bling Bling Diamond Member
Posts: 5859
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: V68 flap control motor - connector type

Post by RUM4MO »

littlepolo wrote: Tue Dec 12, 2017 6:49 pm pm sent, thanks.

There are some new units manufactured by Hella which are half the price of the new VW part. Probably a better option than a used unit off eBay that might give up at some stage after doing all that work?
I think that plan makes sense as they all probably fail eventually, I'd be a bit annoyed if I replaced one with a used one and it only lasted a month or so!
littlepolo
Gold Member
Posts: 778
Joined: Thu Jul 21, 2011 9:47 pm

Re: V68 flap control motor - connector type

Post by littlepolo »

alexperkins wrote: Wed Dec 13, 2017 11:51 am 6Q0907511 is the correct part number for your car. This has an oval plug

The hella ones ive found are matching to 6Q0907511C which is for later chassis numbers than yours, and take the rectangular plug
So there is a good chance mine being an earlier chassis number most likely takes the oval plug?
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: V68 flap control motor - connector type

Post by alexperkins »

Its not a case of chance, yours definitely takes the oval plug lol

Ive matched that part number to your chassis number on the official VW parts system :)
littlepolo
Gold Member
Posts: 778
Joined: Thu Jul 21, 2011 9:47 pm

Re: V68 flap control motor - connector type

Post by littlepolo »

alexperkins wrote: Wed Dec 13, 2017 2:28 pm Its not a case of chance, yours definitely takes the oval plug lol

Ive matched that part number to your chassis number on the official VW parts system :)
I like your confidence.

The tailgate boot never unlocked on the central locking and always required a key to open it. When I had the engine stripped down and was waiting for parts I decided to investigate. One of two screws that hold the actuator assy was missing such that the piston missed the lock. I could not find the screw in the tailgate. Of course, it could have fallen out at some time, though it's a long fine screw thread. Another explanation is is slipped through quality control somewhere back in 2002.

Thanks, I'll get it while it's going.
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: V68 flap control motor - connector type

Post by alexperkins »

Interesting that the screw was missing. Did you manage to get a replacement? I can get the part number if not.
bvs
Silver Member
Posts: 271
Joined: Sat Feb 13, 2016 7:56 am
Drives: 02 1.4s 16v
Location: perth

Re: V68 flap control motor - connector type

Post by bvs »

I replaced our V68 last year and decided to just take the pain to buy a genuine VW part (£120 ish istr) as in deference to my old knees I did not want to have to go back and do it again - :mrgreen:
K.I.T.T put a very useful 'how to' guide on here - just in case you have not seen it.
littlepolo
Gold Member
Posts: 778
Joined: Thu Jul 21, 2011 9:47 pm

Re: V68 flap control motor - connector type

Post by littlepolo »

alexperkins wrote: Wed Dec 13, 2017 3:05 pm Interesting that the screw was missing. Did you manage to get a replacement? I can get the part number if not.
Thanks. I had a suitable screw in my shed. Removed the bracket at the rear of the handle to fit it.
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: V68 flap control motor - connector type

Post by alexperkins »

Cool 8)
Tusauria2975
New
Posts: 1
Joined: Mon Mar 25, 2019 10:18 am
Drives: Polo 9n3 4door 1.4 16v
Location: Istanbul

Re: V68 flap control motor - connector type

Post by Tusauria2975 »

alexperkins wrote: Wed Dec 13, 2017 5:25 pmCool 8)
Hi alexperkins
Can you help me to confirm the connector type of V68 motor?
Thanks
Post Reply