Hi all, new to the forum
My daughters polo keeps throwing this fault, which from the looks is 02 sensor circuit Bank 1 sensor 1, I have replaced the sensor with a Bosch one but now after around 8 miles puts engine warning light on a says its the same fault?
has anyone got any suggestions on why it would do this and tips on trying to resolve, its driving me crazy.
many thanks Nick
Fault code P0130
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Fault code P0130
Follow the wiring loom back from the sensor. Its not uncommon that the wiring breaks up on these and then causes a fault
-
- New
- Posts: 4
- Joined: Sat Jun 15, 2019 12:53 pm
- Drives: 2003 polo 1.2
- Location: Milton Keynes
Re: Fault code P0130
Many thanks, will have a lookalexperkins wrote: ↑Mon Jun 17, 2019 11:29 am Follow the wiring loom back from the sensor. Its not uncommon that the wiring breaks up on these and then causes a fault
-
- New
- Posts: 4
- Joined: Sat Jun 15, 2019 12:53 pm
- Drives: 2003 polo 1.2
- Location: Milton Keynes
Re: Fault code P0130
Well, followed the loom and found said wire broken, thanks again and just hope this was the problemalexperkins wrote: ↑Mon Jun 17, 2019 11:29 am Follow the wiring loom back from the sensor. Its not uncommon that the wiring breaks up on these and then causes a fault
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Fault code P0130
Excellent. Fingers crossed its fixed!
-
- New
- Posts: 4
- Joined: Sat Jun 15, 2019 12:53 pm
- Drives: 2003 polo 1.2
- Location: Milton Keynes
Re: Fault code P0130
well 30miles done and no engine lights so far