Error code P0301 Solved

Chat about your 9n Polo (inc GT and Fun)
Post Reply
Aybesea
Getting There!
Posts: 81
Joined: Sun Nov 16, 2014 12:34 pm
Drives: Polo 9Ns 1.2 AZQ 2003 Reflex Silver
Location: Nr Corsham,Wiltshire

Error code P0301 Solved

Post by Aybesea »

Had this error code P0301 come up on my scanner so i took the plug out of No1 cylinder looked ok but cleaned it and also the coil pack.After putting them back on i started the engine and no error code but the engine still misfired.So i took the No1 and 2 coil pack off and put a multimeter across both of the outside 4 pin connectors on No1 and No2 coil packs,got a reading on No2 of .38 but zilch on No1coil ,headed off to Eurocar parts and replaced the coil pack for No1,also got a set of sparkplugs and new air filter.fitted it all and all is ok now Hoora :)
Top
Post Reply

Return to “MK6 (9N) Polo - Years 2002-2005”