9n strut brace & lip spoiler

[Kuru14]

ive heard of people buying them from seat and instaling them.. anyone have a part number and price of a front strut brace?

also does anyone know if i can get this lip spoiler anywhere else possibly cheaper?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0295935044

thanks

[ryandel_9n3]

you can get the "lip spoiler" on ebay cheaper.
look up seat leon cupra R parts.
or go to seat.

[chewy]

Strut brace part No. 6L0 071 710 and they are £55ish mate

The splitter part No. 1ML805903 iirc dont know how much

Off to check the bay

[chewy]

Here ya go


http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %26ps%3D56

[TDI_Burd]

Seat might be cheaper for the splitter

i need to price one so will find out from seat how much

[Kuru14]

Cheers for that chewy! got the splitter now just need to sort the strut brace.

[polospeed]

Strut brace part No. 6L0 071 710 and they are £55ish mate

The splitter part No. 1ML805903 iirc dont know how much

Off to check the bay

Cool might give seat a ring

[blkpolo]

how do the splitters fit on?

[Kuru14]

im not sure yet but should be fitting mine in the weekend so i can let u know how it goes for me..

[blkpolo]

Cheers man

[Kuru14]

havent fitted it yet but had a good look at the bumper and it seems that ul have to cut ur own holes for the clips on the splitter to fit in.. i think i might just drill some holes and go for some nuts and bolts.. unless anyone knows of a better way to fit this in?

[blkpolo]

how hard was this to fit then? thinking of getting one soonish.

[Kuru14]

sorry for not getting back forgot about this, well i have fitted it and i didnt find it too hard, if your a fairly conifdent with your diy its not going to be a problem. It just needs to be lined up properly before commiting to drillign holes.. you will need about 16 screws if your going to drill them in (whcih is what i did). You will also have to cut 2 holes in the bumper where the splitter will clip in the middle.

i realise this probably doesnt give you a good idea so il try and take some good pictures over the weekend and post them up for you as the bumper will be coming of anyway.

[blkpolo]

cheers that'd be helpful

[Kuru14]

Ok so heres my attempt;

the spoiler itself wich needs to be trimmed at either end but i just left this till the end, after id fitted it;


in the pic u can see in the middle theres to bit sticking up these are like clips and need to be placed through a hole in the bumper. For this i masked up the area so i can make a lot of measurements and draw lines n what not till i got the spliiter bang on where i wanted it, i then cut the hole slightly smaller than needed;


it needed a bit of trimming but eventualy i got the clips through;



i then drilled through from the underside holes along the tabs on the splitter and used washers, screws and clips to secure the splitter in place;




hope this helps, defintly improves the look of bumper in my opnion, sorry for some of the pics being low quality..
heres how mine looks in the end;