lowerinf seized coilovers
- red6n2
- Bling Bling Diamond Member
- Posts: 2090
- Joined: Wed Mar 25, 2009 8:51 pm
- Location: Northampton
lowerinf seized coilovers
i wanna take the coilovers a bit lower but the bit that does so is siezed anyone got any ideas as to how to make it so i can actually take it lower ?
Re: lowerinf seized coilovers
Un-seize it. Spray wd-40 on the ring and it a hammer to hit it gently to free it up. Then use the C spanner on it. if it dont move, then put the C spanner on it and then bang it with a hammer! should free it upred6n2 wrote:i wanna take the coilovers a bit lower but the bit that does so is siezed anyone got any ideas as to how to make it so i can actually take it lower ?
- red6n2
- Bling Bling Diamond Member
- Posts: 2090
- Joined: Wed Mar 25, 2009 8:51 pm
- Location: Northampton
Re: lowerinf seized coilovers
cheers fella,
-
- Bling Bling Diamond Member
- Posts: 3297
- Joined: Tue Dec 10, 2002 1:01 pm
- Location: Swindon
- Contact:
Re: lowerinf seized coilovers
next time make sure you get stainless threads
I had some very early KW`s from before they started to use stainless. Even through copperslip they would seize!
I had some very early KW`s from before they started to use stainless. Even through copperslip they would seize!