Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hello guys, I write from Italy and I am a proud owner of three years of a 1.2 hub on which I made a few tweaks, I hope you like it!
As soon as I can I insert photos!
Welcome thealbert and Andrea (my Italian friends).
Beautiful images with very interesting modifications, surely you will get many questions from other users about them.
Lucky for it.
Installing lights door
connections per pole five gates are:
Front door driver, yellow / orange engine glasses and white / green lock
Front door on the passenger side, yellow engine glasses and white / green lock
Rear door left, yellow / black engine glasses and white / purple lock
Door rear right, yellow / black engine glasses and white / green lock
Before cutting or welding, always check with the tester to verify the operation!
Tape the wires with duct tape along with the existing wiring and leave about 15cm of wealth where there is the lamp connector!
The photos relate to the front door on the passenger side but the process is the same for all the doors!
thealbert wrote:Installing lights door
connections per pole five gates are:
Front door driver, yellow / orange engine glasses and white / green lock
Front door on the passenger side, yellow engine glasses and white / green lock
Rear door left, yellow / black engine glasses and white / purple lock
Door rear right, yellow / black engine glasses and white / green lock
Before cutting or welding, always check with the tester to verify the operation!
The photos relate to the front door on the passenger side but the process is the same for all the doors!
I'm sorry... I know english isn't your first language. And it isn't mine either... But I simply doesn't understand a word of what is written here.
I have not yet made this mod because the door panels are very expensive if you make a mistake when cutting but I rescue this interesting information (diagrams) that I published on the Italian forum to warning/illumination lights on the doors.
Driver door
Left and right rear doors
Front passenger door
---------------------------------------------------------------------------------------------------
Pictures (with your permissionthealbert)
+Supply from the connector on the unit window. (All is pin 16).
-Ground from the door contact. (see diagrams for exact pin each door).
In this way only turn on the light from the door which is opened.
Last edited by ciclo on Tue Oct 13, 2015 7:28 pm, edited 1 time in total.