<< SAI/EVAP Delete >> Questions?
-
- New
- Posts: 1
- Joined: Thu Feb 12, 2015 4:37 pm
- Drives: 9n3 GTi
<< SAI/EVAP Delete >> Questions?
SO, i've been scouting various forums trying to see the best way to get rid of this system and no one seems to have a definitive answer to the problem, I'm aware that i need resistors to ensure i don't get a EML but i already have a EML for incorrect flow and i've read threads where they say an incorrect flow code can't be got rid of with a resistor and the whole reason why i want to remove the system is to remove this code and tidy up the bay in the process. Some people say i need a 10w 330ohm resistor for the delete to work and i don't mind wiring these in if it works but i just need to know exactly what needs to be done as i've seen people do the delete on this forum already. A plug and play option would be good but the only links i can find are from 'merica or Europe with extortionate shipping. Basically i just need to know if deleting the system correctly with the resistors fitted will give no codes and if so what resistors i will need.
-
- Silver Member
- Posts: 486
- Joined: Mon May 13, 2013 7:20 am
Re: << SAI/EVAP Delete >> Questions?
you will need to get it mapped out