ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝

Chat about your 6R/6C model Polos here!
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel »

Mod that I'm planning to do, it might suit you too. Since you like lights a lot too :lol:

Image
6Q0947291A 82V

+
Image
6R6867601A

+
Image
893 971 633

+
Image

You already have the permanent plus (RVC), ground (RVC or somewhere else) and ground-if-hatch-is-open (T5/1)

Edit:
maybe a set of 8KD 947 411 next to the lock as well :mrgreen: :twisted:

http://www.aliexpress.com/item/4Pcs-OEM ... cb25caf3de
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

shpunt wrote:hello.
any1 give me pls electro wire diagramm for driver and passenger connector J386 and J387.
a connector is responsible for what.
Sorry, I do not understand what you mean.
iichel wrote:Mod that I'm planning to do, it might suit you too. Since you like lights a lot too :lol:
...
:lol:
Will you have enough space to fit it?

Rear Puddle lights? :mrgreen: , but you need automatic tail gate. :twisted: (check out diagrams and ETKA, maybe it's possible)
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel »

You mean the Scirocco puffers and Seat Toledo gas springs?
And I'm not sure if it fits, but I'll let you know :mrgreen:
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

iichel wrote:You mean the Scirocco puffers and Seat Toledo gas springs?
No, I mean
:lol:
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel »

I could not find it in ETKA yet (not sure what I'm looking for though, gas springs or electrical motors) but it's very comforting to know that many of the electrical components of the T6 are resistant to boiling hot temperatures up to 125C. Most people stop at around 45-50 degrees for longer times. :mrgreen:
ciclo wrote: but you need automatic tail gate. :twisted:
That is for sure :twisted:
benzinkopf
Gold Member
Posts: 862
Joined: Wed Apr 02, 2014 4:01 pm
Drives: 1.2TSI 105HP DSG7
Location: Malaysia

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by benzinkopf »

ciclo wrote:

Great video, thanks! 8)

---

Some Updates, maybe they help to someone:☼ All Polo 6R (EU). WIRINGS. BCM Max. Automatic lights. Light Assist. ☼
Wow Ciclo, rain closing is possible now in Polo Sedan?
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

benzinkopf wrote: Wow Ciclo, rain closing is possible now in Polo Sedan?
I think it is related with doors units besides BCM and RLS. 'Rain closing' does not work in my R-line with the same BCM and RLS. In study...Image
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

iichel wrote:I could not find it in ETKA yet (not sure what I'm looking for though, gas springs or electrical motors)
Image
Adam87
Bronze Member
Posts: 207
Joined: Tue Apr 12, 2016 8:25 pm
Drives: T5.2
Location: England

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by Adam87 »

Hi ciclo, some amazing work you've put into the polo, you seem to be very knowledgable when it comes to electrical wizardry :lol: apologies for cantacting on thread but I cannot pm just yet, I have a t5 and could do with some of your knowledge as the polo and t5 operate in similar ways.

Regards
Adam
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8837
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo »

Hello Adam87, welcome! ask what you want here in my thread, no problem, it will be a pleasure to help you. :wink:
Adam87
Bronze Member
Posts: 207
Joined: Tue Apr 12, 2016 8:25 pm
Drives: T5.2
Location: England

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by Adam87 »

Great news ciclo [emoji106] I have a my15 T5 highline and will be retrofitting lane assist, bi-xenons, RLS, heated sets etc, I see that you retrofit the t6 BCM into the polo (7E0 937 090), will it work with xenons? All I can see in etka is listed with halogen or led. Also Is there anything extra in instrument cluster to add? I believe there is no convenience menu? I have this cluster installed Image


Sent from my iPhone using Tapatalk
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel »

Yes, the 7E0 937 090 BCM should work with bi-xenons as well. ciclo has it in his polo and his polo has the OEM bi-xenon headlights. the reason the bi-xenon is not listed in etka for the T6 is simply, because the T6 does not come with bi-xenon. It only comes with halogen or full LED headlights ;)
about the cluster, i don't know that.
Adam87
Bronze Member
Posts: 207
Joined: Tue Apr 12, 2016 8:25 pm
Drives: T5.2
Location: England

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by Adam87 »

Thanks for the reply iichel, would you say to use coding from 7H0 bcm for xenons or will it be listed in long coding? Is there any specific prefix after part no 7E0 937 090 * ***?

Thanks


Sent from my iPhone using Tapatalk
ORiOn
Bronze Member
Posts: 239
Joined: Thu Sep 18, 2014 9:00 pm
Drives: Polo BlueGT / Audi S5
Location: Switzerland
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ORiOn »

Hey guys!

Is it possible to install original bi-xenons an a polo with 6R0937087B BCM?

Thanks! :D
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel »

ORiOn wrote:Hey guys!

Is it possible to install original bi-xenons an a polo with 6R0937087B BCM?

Thanks! :D
Yes and no. With every BCM it is possible to install OEM bi-xenons. But the best way is to operate the LED through the BCM so they will dim when set to parking lights mode.
In that case, the 087B will not work, you will need a 089 or a 090.
Adam87 wrote:Thanks for the reply iichel, would you say to use coding from 7H0 bcm for xenons or will it be listed in long coding? Is there any specific prefix after part no 7E0 937 090 * ***?

Thanks


Sent from my iPhone using Tapatalk
It will not be listed but i'm sure some people here, including myself, will be able to assist you with it.
Locked