Damn thought that would be the caseCNK wrote:But I bought sideskirts too![]()
Without sideskirts it looks like a single stair between bumper and rest of car.
For example: https://scontent.fwaw3-1.fna.fbcdn.net/ ... e=572D24D1
![Sad :(](./images/smilies/icon_sad.gif)
Damn thought that would be the caseCNK wrote:But I bought sideskirts too![]()
Without sideskirts it looks like a single stair between bumper and rest of car.
For example: https://scontent.fwaw3-1.fna.fbcdn.net/ ... e=572D24D1
ciclo wrote:Therefore will be soon, let's see what happens.CNK wrote: Horn and buttons works, I will try to coding this on the new BCM.
Do you have the three bags?
By the way, Krzycho's Golf can be one of the best in its class around the world, I like it, your 6R follows the same path.
Heheh, dziękówka! Miło widzieć tutaj kolejną osobę z PolskiRekinPoznan wrote:Great mods![]()
Success in further modes, I think of the directory to this forum is how you write one of the best .
the first modification for me, Xenon headlights with LED with succes, next in progress
Best Regards Chriss
Yeap, these are old photosciclo wrote:I hope all wires shown in the pic were joined with the plastic ties or cloth tape to the original harness.![]()
It's for better air circulation
CNK wrote: It's for better air circulation
I'm joking.
As you wrote to me:ciclo wrote: WOW! LED headlights, perfect! So, your new static cornering light will be in the new R-line fog lamps.
This is the reason of +30 red wire to SB57a---Fuse15A---SB57b--->T73b/11.
+ T73b/9 --->T2/1(left fog light),
+ T73b/10 --->T2/1(right fog light),
+ VCDS coding, of course.
Yes, I know, you have it, but for me this isn't so important to have second mirror-switchesciclo wrote: Buttons
PS: I forgot to write in above reply that the interior lights also are controlled by the BCM.
Connectors are no problem, I need to have PDC main harness too, so the cheapest way for me is to buy complete harness from VW Polo 6C with LED's, something like this one:ciclo wrote:It is very easy do it properly and with common sense...
A remark:
According ETKA this is the appropriate connector for LED headlamps http://www.carsystems.pl/connector-kit- ... d1856.html
[/size]
Ok, thanks @iichel, so tomorrow I'm going to buy itiichel wrote:Yes auto leveling headlight system is the same for all bcm. Power train can, 12v acc, and, 3 wires to sensor and per headlight 4 wires