Hi Guys,
Been trying to squeeze every last drop of extra power from my 1.4 16v.
Been looking at exhaust manifolds and these 2 keep coming up.
From past experiences the 4-2-1 setups seem to be better for low-mid range and the 4-1 are better top end.
Anyone got any experience with either or suggestions on what else I should be looking at?
1.4 16v Exhaust Manifold
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 1.4 16v Exhaust Manifold
Most people go for the raceland 4-2-1 which is a good fit on these engines
Re: 1.4 16v Exhaust Manifold
Thanks Alex.
That's the one I'm leaning towards, with a resonated Sportex cat-back system.
I'm getting too old for a non-res and there's noise limits at track days to keep in mind.
That's the one I'm leaning towards, with a resonated Sportex cat-back system.
I'm getting too old for a non-res and there's noise limits at track days to keep in mind.
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 1.4 16v Exhaust Manifold
That would be a winning combination. I had a non-res on my Edition 30. Boy was it loud!!
Re: 1.4 16v Exhaust Manifold
My old Clio 172 had a similar setup, oem Renaultsport 4-2-1 manifold, decat and resonated Sportex cat back.
Sounded spot on, not too loud and a nice note.
Hoping this setup works out similar
Sounded spot on, not too loud and a nice note.
Hoping this setup works out similar
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 1.4 16v Exhaust Manifold
Have you got the 75 or 100bhp 1.4?
Re: 1.4 16v Exhaust Manifold
it's the 75bhp with a GTI inlet manifold, GTI throttle body, BMC CDA induction kit and silicone HT leads.
Should be fitting a set of polybushed wishbones this weekend and it's sat on 40mm springs.
Just sent a guy on FB a message about some solid top mounts aswell.
Should be fitting a set of polybushed wishbones this weekend and it's sat on 40mm springs.
Just sent a guy on FB a message about some solid top mounts aswell.
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: 1.4 16v Exhaust Manifold
Very nice. A 4-2-1 will help a little then