Hi all I have a 1992 Mk2f polo that I am doing a engine conversion from a 1.0 spi to a 1.3 mpi.i have the complete loom and Ecu for engine. I have connected all the wiring loom except one 6 pin plug and one two pin plug from distributor. The Haynes manual says it goes to the Ecu but I can’t find anywhere for it to go. Does anybody know what I should do.
Cheers
Gt 1.3 mpi engine conversion wiring issues
-
- New
- Posts: 2
- Joined: Sun Jun 03, 2018 9:23 pm
- Drives: Mk2f polo bready
- Location: Watford
-
- New
- Posts: 2
- Joined: Sun Jun 03, 2018 9:23 pm
- Drives: Mk2f polo bready
- Location: Watford
Re: Gt 1.3 mpi engine conversion wiring issues
Sorry one 6 pin plug and one 3 pin plug
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: Gt 1.3 mpi engine conversion wiring issues
Those are pretty thick wires so itll be a high current job whatever they are doing. Where on the loom are they, and where do they branch out from?