Was afraid of that.. Thanx for quick answer =)POLO Clive wrote: ↑Sat Jan 11, 2020 7:05 pmYou don't get them if you have LED headlights mate, see here > viewtopic.php?f=71&t=74175Cpt_graybeard wrote: ↑Sat Jan 11, 2020 5:51 pm The red light. How do you turn them on? i cant seem to find the knob, or can´t i turn them on when i have led?
Alloy wheel help
-
- New
- Posts: 13
- Joined: Sat Jan 11, 2020 5:47 pm
- Drives: Polo gti 2018
- Location: Sverige
Re: Alloy wheel help
-
- Getting There!
- Posts: 71
- Joined: Mon Dec 17, 2018 8:53 am
- Drives: Polo blue GT - 170BHP - 320nm
- Location: South Wales
Re: Alloy wheel help
Et30 and their bola b6. Your right about the red tints and since taken them off, silly idea really
-
- Gold Member
- Posts: 686
- Joined: Sun May 13, 2018 1:15 pm
- Drives: 2018 Polo SEL
- Location: Lincolnshire
Re: Alloy wheel help
The thing is, you liked the red DRL's, but the implications you could have? You've done the right thing by removing the coloured film.
-
- Bronze Member
- Posts: 157
- Joined: Sat Feb 16, 2019 10:50 am
- Drives: GTi++/TT/TDi/190E
- Location: Vdbp.
Re: Alloy wheel help
So what is the size of the wheel after all?
On their website, Bola states that the B6 is available either in 8 or 9J width.
Can you show us a pic what it looks like looking from the back or the front?
-
- Getting There!
- Posts: 71
- Joined: Mon Dec 17, 2018 8:53 am
- Drives: Polo blue GT - 170BHP - 320nm
- Location: South Wales
Re: Alloy wheel help
-
- Getting There!
- Posts: 71
- Joined: Mon Dec 17, 2018 8:53 am
- Drives: Polo blue GT - 170BHP - 320nm
- Location: South Wales
Re: Alloy wheel help
They sit flush with the outside of the arches, plus its lowered 35mm all around as well
-
- Silver Member
- Posts: 276
- Joined: Mon Jun 25, 2018 10:56 am
- Drives: Polo SEL 1.0 TSI 115PS
- Location: North Yorkshire
Re: Alloy wheel help
It looks as if they would be better suited to wider tyres RichTea, probably 235/40, but for now you'd better keep well away from kerbs
-
- Gold Member
- Posts: 686
- Joined: Sun May 13, 2018 1:15 pm
- Drives: 2018 Polo SEL
- Location: Lincolnshire
Re: Alloy wheel help
Not being funny, why a black boot lid?
-
- Getting There!
- Posts: 71
- Joined: Mon Dec 17, 2018 8:53 am
- Drives: Polo blue GT - 170BHP - 320nm
- Location: South Wales
Re: Alloy wheel help
Touch wood ive never scratched a wheel on a kerb in my life time lolPOLO Clive wrote: ↑Tue Jan 14, 2020 11:52 am It looks as if they would be better suited to wider tyres RichTea, probably 235/40, but for now you'd better keep well away from kerbs
-
- Getting There!
- Posts: 71
- Joined: Mon Dec 17, 2018 8:53 am
- Drives: Polo blue GT - 170BHP - 320nm
- Location: South Wales
Re: Alloy wheel help
I just like to modify my car, always have. This car will have a full colour change sometime this spring/summer. This is one i did last year, lime green with a gold pearl
-
- Silver Member
- Posts: 276
- Joined: Mon Jun 25, 2018 10:56 am
- Drives: Polo SEL 1.0 TSI 115PS
- Location: North Yorkshire
-
- Getting There!
- Posts: 71
- Joined: Mon Dec 17, 2018 8:53 am
- Drives: Polo blue GT - 170BHP - 320nm
- Location: South Wales
Re: Alloy wheel help
I bet you were i lent my wife my car a few years ago and she scratched one of my wheels, needles to say she never drove it again lolPOLO Clive wrote: ↑Tue Jan 14, 2020 6:36 pmOh I have, I did this just a couple of weeks into ownership, I was quite annoyed with myself
151.JPG
-
- New
- Posts: 2
- Joined: Sat Apr 04, 2020 8:38 am
- Drives: Polo GTI AW 2019 GPF
- Location: Livingston
Re: Alloy wheel help
https://www.willtheyfit.com/index.php?w ... offset2=48
I'm looking to put OZ FORMULA HLT (MATT, BLACK) 18x8j with 235 PS4S tyres. Had a quick look on will they fit. I'm worried about them sitting 3.3mm closer to the suspension strut. Might need to add some 3mm spacers. i'm comparing them to the stock brecsias. Can anyone see any issues I might have? Car has not been lowered.
I'm looking to put OZ FORMULA HLT (MATT, BLACK) 18x8j with 235 PS4S tyres. Had a quick look on will they fit. I'm worried about them sitting 3.3mm closer to the suspension strut. Might need to add some 3mm spacers. i'm comparing them to the stock brecsias. Can anyone see any issues I might have? Car has not been lowered.