Hello my friend , for another time you have absolutely right.
I discovered that the head lights washer pump went out of duty , i have replaced it and everything works great.
Best regards
Vasilis
Hello my friend , for another time you have absolutely right.
@ciclociclo wrote: ↑Thu Aug 01, 2019 7:52 pm 4
Plate lights. Before and After.
Before (your current installation)
After
-Remove the panels that are necessary to run the wire next/parallel to the original harness.
-Cut the indicated wires near the license plate lights inside the car (trunk/boot).
For example, look for the images of the license plate lights wire installation in this installation guide 6R RHD, page 13.
Original wiring diagram for BCM Max. Plate lights X4, X5.
---
Special wiring for automatic lights. (Skoda Fabia VRS 2012, 'C' Model year)
Follow the instructions on the following link to complete the installation of this wiring. https://drive.google.com/file/d/0B2nv91 ... sp=sharing
Note:
For this wiring installation you do not have to touch anything on the red and black connectors. These steps were done previously.
---