In my UP there is already a wire in T73b/11, which is black/gray and I think 1mm2.
EDIT: I *think* this wire comes from SC18A which had a 7.5A fuse. However I removed this fuse during my reverse light problem, and never put it back, and I experienced no problems yet.
By looking at some pictures I made I can see the following wires are not present:
T73b/9
T73b/10
T73b/3
T73a/5
However these wires *are* present:
T73b/5 = Left LED DRL module = black/white
T73b/6 = Right LED DRL module = blacke/green
I don't have any DRL lights in my car so no idea what these wires are used for. Do you have any idea?
But I get your point about T73b/11 if I want to use SCL in the future though.
About dimmer, lets do it first way, so T73b/4 to T17/16 orig wire.What way do you prefer?
Yes, this wire I have prepared already, I only need to put it in the car.It will always be possible to individualize the license plate light with a new wire, from T73b/7 to the license plate light.
I agree.Everything will be 90€ + shipping. Do you agree?
Best regards,
H2Deetoo