Polo 6N2 ABS module coding

Chat about your MKV (6N2) Polo GTi
Post Reply
mike18clark
New
Posts: 3
Joined: Wed Dec 09, 2020 3:39 pm
Drives: 6N2 GTI
Location: Hampshire

Polo 6N2 ABS module coding

Post by mike18clark »

Hi all,

I have had a look online, and have used the search utility, and have not been able to find a definitive answer.

If I was to replace the ABS control module on my 6N2 GTI, would this require coding to the car? Currently have the dreaded 01276 code, and will be trying the repair documented on this website. Contemplating ordering a replacement unit, but don't want to be stuck with the same, or more errors!

Many thanks!
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6N2 ABS module coding

Post by iichel »

just transfer the old coding to the new module and you should be good to go
mike18clark
New
Posts: 3
Joined: Wed Dec 09, 2020 3:39 pm
Drives: 6N2 GTI
Location: Hampshire

Re: Polo 6N2 ABS module coding

Post by mike18clark »

What would be required to achieve that? Would VCDS-lite be sufficient enough?
mike18clark
New
Posts: 3
Joined: Wed Dec 09, 2020 3:39 pm
Drives: 6N2 GTI
Location: Hampshire

Re: Polo 6N2 ABS module coding

Post by mike18clark »

What would be required to achieve that? Would VCDS-lite be sufficient enough?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6N2 ABS module coding

Post by iichel »

Probably, yes.
Post Reply