Hi there! I've swapped a non mfd cluster with a red mfd cluster. The thing is, the old mfd cluster had a board computer under the speedo gauge, and have a wiper stalk, that changes the infomation. After the swap, the stalk is useless, I can't change the information on mfd. The cluster is working fine, the immo has been adapted in the new cluster. The question is... I have to program the new cluster with mfd to stalk work? By the way... here's the info about car and clusters...
Polo 9N 2003 2.0L Brazil Model
Original cluster 6Q0920820Q VDO V05
New (used) cluster 6Q0920826K VDO V04
Cluster swap from non mfd to red mfd
-
- New
- Posts: 1
- Joined: Mon Feb 21, 2022 10:14 pm
- Drives: 2003 9N 2.0 8V Bbx
- Location: Brazil
Cluster swap from non mfd to red mfd
- Attachments
-
- New cluster
- D69BAD15-7235-46F3-98DC-672E5D6E4264.jpeg (1.64 MiB) Viewed 656 times
-
- Original cluster
- 95C26273-9011-48F7-AA1A-F578FA1569D3.jpeg (1.32 MiB) Viewed 656 times
-
- New cluster
- 37E6F124-3499-474B-8149-4D0E0C970694.jpeg (798.67 KiB) Viewed 656 times
-
- Original cluster
- B8EB2DB8-39DC-411F-A47D-7474D5E42879.jpeg (2.53 MiB) Viewed 656 times