Ibiza 6j1 2012 Upgrade BCM 6R0937087K--->7H0937090 Cyclo HELP :)

[KamilPL]

1400a1 for both?

left side
I did not have time to change and it is the old 6R0959801AK Encoding 020000 ---> tomorrow I will change to 6R0959801CG encoding 0200A3

right side

6R0959802CL 1000A3 coding

Old engines
6R0959801AK, 6R0959802AR

New motors
6R0959801CG, 6R0959802CL

[KamilPL]

Found on the Polo 6R / 6C forum

What are the differences between the encodings?

[ciclo]

[KamilPL]

The second motor changed (6R0959801CG) the mirrors close from the remote control, but the problem with the windows persisted

Window switch up - windows down

Window switch down - windows up

closing the car with the remote control, the windows open, the mirrors close

when opening the car with the remote control, the windows close, the mirrors open

Cyclo you have Schematics ele. polo 6C 2015/2016 to compare Polo / Ibiza motor wiring / window switch?

Standard Ibiza / Polo diagrams

However, in order for the mirrors to close from the remote control / joystick, I had to change the T16i / 15 <--> T16i / 14, 16i / 14 <--> T16 / 15.

[KamilPL]

The mirrors now close and open with the remote control / joystick

What to change in the window wiring?

[ciclo]

You must learn how to code with the info that I have shown you in the previous message.

[KamilPL]

You must learn how to code with the info that I have shown you in the previous message.

UPDATE!

After changing the coding, windows and mirrors work properly

[ciclo]

Congratulations!

In this forum, it is allowed to share info, in case you forgot the word 'share'. That which makes us great apes and takes us a little further from being pro apes.

[KamilPL]

sorry to give you an answer so late.
The solution was to rewrite the left door coding to right and right to left

Next thing ....
I bought an MFSW from a Leon 5F.
want to do MFSW in my ibiz 6j PQ25.
How to encode Pilot 4B, correctly connect and encode MFSW so that everything works properly?

[ciclo]

In response to your private message:

There are various models of MFSW depending on the equipment of the vehicle, please show us the new steering wheel you have purchased (MQB) and your current steering wheel (PQ25).
Depending on this we can find out to what extent it will be possible for everything to work properly.

[KamilPL]

Mfsw

[ciclo]

Well, I don't have any kind of experience with that 4B module (I think remember iichel did some testing with this module on his vw cars).
I guess you should unmount it and remove it from the GW install list to avoid conflicts with the new buttons of the new MFSW.

I'm also assuming you need to provide a new power supply (+15) and a new communication/wire LIN (doors LIN, T73b/17) to the new buttons, also the ground/earth obviously. This process is explained here in the forum for VW POLO 6R (BCM PQ25).

Once this is done, the BCM will recognize the new multifunction buttons as a subsystem (J453, MFL), which must be coded according to equipment (post an autoscan).

From (4B E440, CAN lines)...


To (J453, LIN) ...




---

6R