My car did not come with a MFSW or the wiper switch that includes the Trip and OK/RESET buttons, so I couldn’t view mpg or anything besides time and outside temp on my MFD.
I’ve just swapped the stalk assembly for one with the buttons, but they don’t work as I assume I’ll have to enable something in VCDS.
Could anyone tell me what it is I need to enable?
Or also is there any other wiring that I would have to do to enable the buttons?
Enabling Trip and OK/RESET buttons VCDS
- iichel
- Bling Bling Diamond Member
- Posts: 6373
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Enabling Trip and OK/RESET buttons VCDS
Yes you do need to add three wires to your instrument cluster and code it with vcds.
Re: Enabling Trip and OK/RESET buttons VCDS
Is there a guide out there?
- iichel
- Bling Bling Diamond Member
- Posts: 6373
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Enabling Trip and OK/RESET buttons VCDS
You will need to run the three blue accented wires on the image and enable byte 1 bit 3 in the cluster long coding.