Wiring for head unit (double DIN) on 2002 9N

Discuss In Car Entertainment
Post Reply
littlepolo
Gold Member
Posts: 797
Joined: Thu Jul 21, 2011 9:47 pm

Wiring for head unit (double DIN) on 2002 9N

Post by littlepolo »

I purchased an Android head unit that uses an ISO harness. In addition, There are a couple of wires that I need to tap into as follows:

Pink - reverse signal from vehicle (for backup camera)
Brown - parking brake (disable/enable video display)

I had a look in the DIN cradle and I can see only the ISO connectors, and wires for the powered DAB antenna (I fitted a while ago) and similar.

Is there somewhere near the centre console that I pick can up the signals for the pink and brown wires above pls?
User avatar
Maarten
Silver Member
Posts: 419
Joined: Tue Aug 11, 2015 9:45 am
Drives: AW R-line Facelift MY2022 Vibrant Violet
Location: The Netherlands

Re: Wiring for head unit (double DIN) on 2002 9N

Post by Maarten »

In the BCM you can find the wires needed
Look at this overview
PIN bezetting BCM Polo 9N 9N3.jpg
PIN bezetting BCM Polo 9N 9N3.jpg (3.57 MiB) Viewed 925 times
User avatar
Maarten
Silver Member
Posts: 419
Joined: Tue Aug 11, 2015 9:45 am
Drives: AW R-line Facelift MY2022 Vibrant Violet
Location: The Netherlands

Re: Wiring for head unit (double DIN) on 2002 9N

Post by Maarten »

Backup light is rückfährlicht (rueckfahrlicht)
Handbrake might be the Anlasssperre
littlepolo
Gold Member
Posts: 797
Joined: Thu Jul 21, 2011 9:47 pm

Re: Wiring for head unit (double DIN) on 2002 9N

Post by littlepolo »

Thanks, I'll have a look. It should be possible to trace from there.
Post Reply