6R - Multifunction Steering Wheel Retrofit

[iichel]

you'll probably need to re-route the horn wire from the horn plate to T5/4. Remove T5/5.
i don't give you any chance to make the CC work without major changes.
for the lighting you need to change the BCM to a model that does support lighting, from 2018 or younger

[Hiroki]

Thanks for the lightning fast reply.

I'm trying to past the OBDeleven report here but it said "Forbidden"

My BCM is

09 Central Electrics

    System description: BCM PQ25 H+3
    Software number: 6R0937087G
    Software version: 0221
    Hardware number: 6R0937087A
    Hardware version: H46
    Serial number: 0344 264100269
    Long coding: 3CB82FF828FB060092300E003FAB9CD0F640417F60800040200000000000

[Hiroki]

you'll probably need to re-route the horn wire from the horn plate to T5/4. Remove T5/5.
i don't give you any chance to make the CC work without major changes.
for the lighting you need to change the BCM to a model that does support lighting, from 2018 or younger

And also T5 you mean by this one?



Thanks for your kind patient.

[iichel]

Yes exactly

[Forsh]

Just like to give a big thanks for the info on this thread having successfully fitted and coded a 6R MFSW with left hand buttons, RCD510 and Bluetooth module.

Having fitted the 6R MFSW I have now got hold of a 6C MFSW with Cruise Control buttons on the left and radio/phone on the right
Having done a fair bit of reading around the forum I'm looking for confirmation that as I understand it CC won't work from the MFSW on a 2012 Polo Match 6R?




TIA

[Hiroki]

Yes exactly

So sorry I was busy and didn’t get a chance to try

I just got the wiring 5K0971584A.
I tried replacing this to my C version. Also no luck with other buttons except for the page left and right plus the “ok” button as volume down.

Is there anything that I’m missing out?

When I remove T5/5 the horn not working.

I already wire up for CC. Waiting the
“VOLKSWAGEN POLO SEL TDI HATCH 3dr 2011 INDICATOR STALK SQUIB CLUSTER 6Q0953503EJ” which will be here next week.

And also my BCM is 6R0937087G. Can I make the light work?

[iichel]

I don't think 087G will have the software for mqb mfsw backlight

[Hiroki]

I don't think 087G will have the software for mqb mfsw backlight

Noted with thanks

[Buci]

Hello,

I have 2012 polo 6r. My wheel is standard plasticky or rubber?!? wheel with out buttons.
I saw a wheel with buttons on the left side for radio and bluetooth answering.
Will this wheel fit without changing the airbag it self.

Thanks

The new one

Screenshot_20240706_122610_Allegro.jpg (1.05 MiB) Viewed 3374 times

[iichel]

No you will need a new airbag too

[Buci]

No you will need a new airbag too

Do you maybe know airbag part number and part number for wiring mfsw?

Thanks.

[Buci]

No you will need a new airbag too

Do you maybe know airbag part number and part number for wiring mfsw?

Also if the wheel is made just from leafher without buttons will I need to replace the airbag?

Here is the picture of the leather one..


Thanks.

[Buci]

No you will need a new airbag too

Do you maybe know airbag part number and part number for wiring mfsw?

Also if the wheel is made just from leafher without buttons will I need to replace the airbag?

Here is the picture of the leather one..


Thanks.

Can somebody help?

[Buci]

Do you maybe know airbag part number and part number for wiring mfsw?

Also if the wheel is made just from leafher without buttons will I need to replace the airbag?

Here is the picture of the leather one..


Thanks.

Can somebody help?

Please can somebody confirm that the leather one without buttons is direct retrofit to the rubber one without the buttons?

Thanksss

[jammydodger]

Can somebody help?

Please can somebody confirm that the leather one without buttons is direct retrofit to the rubber one without the buttons?

Thanksss

Yes direct fit