you don't have an electrical diagram of the airbag wiring?
I have a steering wheel from a Passat B6 with everything with a cable...but I don't have any active control
any help///please>?
6R - Multifunction Steering Wheel Retrofit
-
- New
- Posts: 2
- Joined: Thu Mar 27, 2025 10:07 am
- Drives: 6R 1.6 TDI 90 FAP 2010
- Location: Grenoble / FRANCE
Re: 6R - Multifunction Steering Wheel Retrofit
Hello Hiroki, did you find a solution to make it work please? I'm exaclty in the same situation than yoursHiroki wrote: ↑Tue Feb 28, 2023 4:22 pm HI all,
Thanks for the wonderful information. I'm new here.
I have 2011 VW polo 1.2 TSI 6R.
I had been a regular no button steering wheel.
I bought this MFSW and trying to retrofit to my car
I followed every steps closely and it was a success.
However, I have 2 issues,
1) Only 4 buttons working.
On the Right, the only one working is "CC Off" button and it working as a Horn.
On the left, Page left --> Song Previous, Page Right --> Song Next, "OK" button reduce the volume
2) No Light
Based on the reading, I believe it must be something to do with the connector ring.
I would like to confirm it with the seniors here for that.
I am planing to add Cruse Control soon and hope I could use the paddle shifter also.
Here are the rest of the photos.
Thanks in advance

Thanks so much !
- iichel
- Bling Bling Diamond Member
- Posts: 6560
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: 6R - Multifunction Steering Wheel Retrofit
There is an emulator for that. Mqb to pq