ciclo wrote:diskoboy, remember you have to check the current flow diagrams before making any modification to the original wiring.
Perfect. I'll allready have the connectors - the red one is the same and the new 1k0972928 I have from an Passat - same connector used in the ignition/starter switch
All of the pins in the 16-pin-connector are the same in Polo year 2011 (6R) and 2016 (6C)
6C climatronic control unit DOES NOT WORK in a 6R. End of story.
Address 19: CAN Gateway Labels: 6R0-907-530-V1.clb
Control Module Part Number: 6R0 907 530 B HW: 1K0 907 951
Component and/or Version: J533 Gateway H28 0020
Software Coding: 7D431D20080000000002
Work Shop Code: WSC 00788 648 00255
VCID: 3260AE41AD7D09B1A84-8067
1 Fault Found:
01336 - Company Data Bus for Comfort System
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 1
Fault Frequency: 2
Reset counter: 89
Mileage: xxx km
Time Indication: 0
Date: 2052.14.15
Time: 14:43:18
I can see in ETKA that 6R0 907 530 E exists, but don't believe that it will ever work...
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Jun 08, 2015 8:22 pm
by ciclo
Thanks for the information.
It is quite likely that all parts of 6C who are involved with CAN lines will not work on 6R.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Jun 09, 2015 8:00 am
by CNK
Thanks ciclo, I will try again
On the vwvortex forum I found an interesting shelf from Golf VI (Rear Storage Tray, 1K0061178A): http://i227.photobucket.com/albums/dd15 ... e18b8d.jpg
This is very useful, but there is no such shelves for Volkswagen Polo
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Jun 09, 2015 11:39 am
by grem
CNK wrote:Thanks ciclo, I will try again
On the vwvortex forum I found an interesting shelf from Golf VI (Rear Storage Tray, 1K0061178A): http://i227.photobucket.com/albums/dd15 ... e18b8d.jpg
This is very useful, but there is no such shelves for Volkswagen Polo
This looks like something I definitely need. I found one for the polo but it is from china
On the other hand, it seems that the LEDs headlights provide good lighting at all times, but the appearance of the headlights is not my favorite.
They need a better design in appearance. IMHO
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Jun 16, 2015 5:10 pm
by shpunt
Hello.
Help me pls activate Auto folding mirrors on my VW Beetle 2014 (3 doors).
I have the same door component.
and my coding:
Address 09: Cent. Elect. (J519) Labels: 7H0-937-08x-09.clb
Part No SW: 7H0 937 090 B HW: 7H0 937 090
Component: BCM PQ25 Max4 H74 0712
Revision: B9074001 Serial number: 28013050140479
Coding: 7CB8697848430C0093A80F306CCB96C4AD42610F60842D41B2A0140A0000
Shop #: WSC 00066 123 12345
VCID: 2D51EF3674B133760F5-8078
Subsystem 2 - Part No SW: 6R0 959 801 BK HW: 6R0 959 801 BK
Component: J386__TSG_FT 003 8662
Coding: 0000A5
Ok.
But it can be different coding for Beetle.
I'll try.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Jun 16, 2015 6:42 pm
by ciclo
Yes, you are right, especially by the system of door closing.
But this is the best information I can provide..., however, if you lose some function, you will have integrate the Bits of your previous coding to the new coding. (enabling or disabling bits)
Удачи вам
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Jun 16, 2015 7:02 pm
by shpunt
Thanks
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Wed Jun 17, 2015 5:57 am
by shpunt
this coding dont work on my Beetle.
Beetle have frameless doors, ie glass on top has no border. (the same as VW Passat CC)
and when you open the door - glass drops slightly (exits the rubber seal 5 mm).
but after this coding - the glass does not fall and I can not open the door.
