polo power!

Chat about your MKV (6N2) Polo
loud
Gold Member
Posts: 989
Joined: Tue Jul 20, 2004 12:17 pm
Location: 25 miles south of Aberdeen Drives: 9N3 Polo GTi

Post by loud »

get smaller wheels, put a cold air feed on your induction kit if you don't already have one (or that'll be decreasing power taking in warm air)
giannispolo
New
Posts: 6
Joined: Sun Mar 27, 2005 9:56 pm
Location: Athens,Greece
Contact:

Post by giannispolo »

Redline wrote:Just strip it out.

Remove the back seats, rear trim, spare wheel, jack, boot carpet and any sound-deadening you come across. If you have any ICE get rid of that as well.
:
off topic: can be erased afterwards. hey Redline your front badge looks good. you bought a black badge and how u glued it on the mask?
jon_poloV
Sponsor
Posts: 825
Joined: Sun Feb 22, 2004 3:18 pm

polo power!

Post by jon_poloV »

i had the 1.4 and you really had to spank it to get any power out of it. I had bmc induction kit etc and didnt make much difference. You are not going to get real noticable power gains unless uyou do something major. Induction kits do sound awsome but do not do alot in power gains deptment. Best bet is to look and sound the nads and see how things go from there.

Jon
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

yeah weight reduction is a cheap solution! :twisted: (its free!)
Post Reply