Page 2 of 2
Posted: Fri May 21, 2004 2:33 pm
by des_pd_ tdi
Wai_Mak wrote:correct me if i am wrong... but taking the plastic cover off will lose your air box and filter... which is not good!!????
No that's Ok, he's only talking about the plastic shielding around the engine, this is not connected to the airbox.
des
Posted: Fri May 21, 2004 5:32 pm
by Nelson_Wilbury
The main problem I'm having fitting it is the ECU, I think on the TDi's they are mounted in a different place? I never actually fitted it properly because the ECU prevented it, I just lined it up
Posted: Sat May 22, 2004 11:03 pm
by POLO9NTDI
Hello again,
It´s a shame Nelson
my ECU it´s in the right side of the car and no problem at all.
I only have to dismount one piece in the top of a suspension tower (left) and run...
I mounted the bar in a Seat dealer
Posted: Sat May 22, 2004 11:20 pm
by Nelson_Wilbury
Yeah, the FSi has a different ECU bracket and theres no way it'll fit
Posted: Sun May 23, 2004 12:23 am
by KarlM
admittedly I havent seen the bays... but could you not relocate the ECU with a TDi bracket? Your warrenties invalid if you fitted that chip anyway...
Posted: Sun May 23, 2004 9:43 am
by Nelson_Wilbury
It's no good if the ECU won't fit in the bracket. If its different its probably different for a good reason.
Posted: Sun May 23, 2004 11:02 am
by carmadaaron
is your location of the ECU the same for all petrol engined 9Ns?
Posted: Sun May 23, 2004 3:39 pm
by Nelson_Wilbury
Same general location, but it the FSi ECU is bigger and so the bracket sticks out a bit more...
Compare my old 1.2 with Petrifieds FSi engine shot earlier in the thread...
Posted: Sun May 23, 2004 9:50 pm
by POLO9NTDI
Yes, your ECU seems to be bigger than the rest of ECU's
You have to sell the car and buy a TDI
Posted: Sun May 23, 2004 10:27 pm
by Nelson_Wilbury
POLO9NTDI wrote:
You have to sell the car and buy a TDI
No way!
FSi rules my world!
Posted: Mon May 24, 2004 3:57 pm
by carmadaaron
lol, hows your new chip going anyway?
Posted: Wed May 26, 2004 4:02 pm
by DJ
Guys..
Is it possible to fit into a 1.4 16V 100ps, other than Seat is there any other OEM/aftermarket product available?
Posted: Tue Jun 01, 2004 10:50 am
by cacatous
Will it fit on my 1.2 65hp Twist?
I'll buy it from whoever was selling it if it does!