UK-POLOS.NET - THE VW Polo Forum

Posted: **Thu Sep 13, 2007 11:07 pm**

Lookin good mate...loveing the silver BMC.

Quick question..what bend is that taking the BMC onto the Throttle body?

Posted: **Fri Sep 14, 2007 12:19 am**

Si_GTi wrote:
I'm going to miss my BMC (its coming off soon) but I'll have turbo power to keep me happy instead

Cheers

dont forget to let me know Si!

Posted: **Fri Sep 14, 2007 2:41 pm**

Rupy wrote:Lookin good mate...loveing the silver BMC.

Quick question..what bend is that taking the BMC onto the Throttle body?

it is a 70mm>70mm diameter 90degree bend..

Posted: **Fri Sep 14, 2007 2:45 pm**

polo_gti21 wrote:hey there people i have just got my BMC induction kit but opted for the limited edition silver one as i havent seen any1 with one of theses yet. anyway i got a right bargain, i managed to get the kit for Â£159 inc vat
from euro styling.

does that price include a breather filter & delivery?

Posted: **Fri Sep 14, 2007 7:08 pm**

Kam Racing wrote:
polo_gti21 wrote:hey there people i have just got my BMC induction kit but opted for the limited edition silver one as i havent seen any1 with one of theses yet. anyway i got a right bargain, i managed to get the kit for Â£159 inc vat
from euro styling.
does that price include a breather filter & delivery?

didnt include breather filter as they didnt have one in stock and yes it was delivered but it was only Â£165 with it. and Rupy its a 90degree bend,70mm diameter. you may need to trim it to fit if you get a SFS pipe.

Posted: **Fri Sep 14, 2007 11:04 pm**

Where do you get these 90deg bends from mate? Also do they go straight onto the filter?

Posted: **Sun Sep 16, 2007 6:25 pm**

try SFS or samco or forge not sure of the price tho.

Posted: **Mon Sep 17, 2007 12:14 pm**

Rupy wrote:Where do you get these 90deg bends from mate? Also do they go straight onto the filter?

I can supply them for Â£16 + postage if you're interested..
http://www.kam-racing.com/product_info. ... cts_id/700

all you need is a couple of jubilee clips to secure it to the BMC and throttlebody if you need these too just let me know..

Posted: **Mon Sep 17, 2007 12:21 pm**

polo_gti21 wrote:
Kam Racing wrote:
polo_gti21 wrote:hey there people i have just got my BMC induction kit but opted for the limited edition silver one as i havent seen any1 with one of theses yet. anyway i got a right bargain, i managed to get the kit for Â£159 inc vat
from euro styling.
does that price include a breather filter & delivery?
didnt include breather filter as they didnt have one in stock and yes it was delivered but it was only Â£165 with it. and Rupy its a 90degree bend,70mm diameter. you may need to trim it to fit if you get a SFS pipe.

shame could have saved you a tenner..

Posted: **Mon Sep 17, 2007 9:35 pm**

oh well its only a tenner, still a bargin in my eyes. can any1 recommend a company or person that can fabricate me a custom air intake to the bmc? as the duct supplied in my eyes looks ugly.

Posted: **Tue Sep 18, 2007 5:35 pm**

polo_gti21 wrote:oh well its only a tenner, still a bargin in my eyes. can any1 recommend a company or person that can fabricate me a custom air intake to the bmc? as the duct supplied in my eyes looks ugly.

you can buy the tubing off ebay, seach the DIY section Mouse did a guide on how to do one, and where to get it from

Posted: **Tue Sep 18, 2007 9:27 pm**

Tim_GTi wrote:
polo_gti21 wrote:oh well its only a tenner, still a bargin in my eyes. can any1 recommend a company or person that can fabricate me a custom air intake to the bmc? as the duct supplied in my eyes looks ugly.

you can buy the tubing off ebay, seach the DIY section Mouse did a guide on how to do one, and where to get it from

i remember reading it mate but its still the same stuff just abit bigger im after a custom stainless one.

UK-POLOS.NET - THE VW Polo Forum

my silver BMC

Re: my silver BMC

Re: my silver BMC

Re: my silver BMC