Page 2 of 2
Posted: Tue Jul 08, 2008 1:11 am
by Dezmoand
The blue/white wire is located in the loom behind the plastic panel where the bonnet release is for my 9n1. You may need to remove this plastic panel and undo the loom tape covering the wires. This is the locking wire which the remote locking control unit sends a negative pulse through. If you hook it up to this wire, it will enable the deadlocks as if it locked with the key - might even allow you to roll up and down the window depending on whether holding the locking/unlocking button on the fob prolongs the negative pulse.
Posted: Tue Aug 05, 2008 3:49 pm
by chinnus
still havnt managed to do this yet.... there must be someone else out there who is struggling as well if anyone has done it or has any ideas could they please share? thanks in advance x
Posted: Tue Aug 05, 2008 9:56 pm
by MGrove03
think im goin to invest in this sometime this month so ill let ya know how i get on
Posted: Wed Aug 06, 2008 12:12 pm
by chinnus
where abouts do you live in the uk i cld post you mine to borrow and try to figure it out?? to save you wasting your ££ if you cant manage it i have tried everything..... elsawin diagrams and all
Re: Rightclick KE60W Remote Central locking onto a POLO 9N3 PICS
Posted: Mon Jul 06, 2009 2:36 pm
by chinnus
sorry to bump an old post but has anyone found a solution to this?
thanks again
tom