Page 2 of 3
Posted: Wed Sep 03, 2008 6:44 pm
by tomo87
it hurts my eyes
Posted: Wed Sep 03, 2008 7:03 pm
by Si_GTi
Makes the poor little Polo look like a basking shark!!
If someone can colour-code a basking shark in flash red with Polo fog lights... that'd make my week

Posted: Wed Sep 03, 2008 7:31 pm
by bbspolo
in a weird sort of way i think i like it! lol
Posted: Wed Sep 03, 2008 7:57 pm
by Trottagti
No way dude, Looks wrong, u can buy the face lift bumper already done like the new polo/golfs on ebay i believe
http://cgi.ebay.co.uk/VW-POLO-6N-BODYKI ... 286.c0.m14
Thats the whole kit but thats an idea!
Looks cack in my opinion!
Posted: Wed Sep 03, 2008 8:07 pm
by 3LL1077
Thats for a 6n dude
But yea looks a pile of w**k
Posted: Wed Sep 03, 2008 8:19 pm
by Trottagti
Indeed it is but u get the idea of wot it would look like, better than the photoshop thing!
Posted: Wed Sep 03, 2008 8:21 pm
by 3LL1077
But he's not after a grille all the way down the bumper is he.
He wanted to see what it would be like to spray it black

Posted: Thu Sep 04, 2008 3:05 am
by big_k
Here's my attempt, the black bit on the bumper is shaped a little better than the previous chops... sorry for the slight messyness, did it on paint lol

Posted: Thu Sep 04, 2008 7:44 am
by Brad.
Meh
Posted: Thu Sep 04, 2008 1:05 pm
by alexperkins
Ideally, youd make the middle grille smaller to allow a better curve for the black. Thats how the new ones pull it off so well
Posted: Thu Sep 04, 2008 3:59 pm
by kipper
chrischap2003 wrote:I think the main problem that makes it look a bit "iffy" is that the lower grill is as wide as the higher grill and it doesnt look as good coming straight down in comparison to on an angle like the new gold, polo, jetta, etc
basically wat i was thinking. cause the lower grill isnt narrower then th upper grill it looks odd.
rossco u thinking wat im thinking? get a front bumper, cut the bottom grill and narrow it so the line of the top grill comes down and meets up with the bottom grill? i thought about doing this to my bumper when i get round to it as im currently modding a rear bumper and moving the number plate recess down so i might try something with the front when i finally get round to doing it. how would u do it then? plastic "weld" it? thats what im doing to my rear bumper im doing now.
Posted: Thu Sep 04, 2008 5:33 pm
by chrischap2003
big_k wrote:Here's my attempt, the black bit on the bumper is shaped a little better than the previous chops... sorry for the slight messyness, did it on paint lol

That actually doesnt look too bad at all! Like the black roof...Although i am not brave enought to attempt anything like this haha
Posted: Thu Sep 04, 2008 5:57 pm
by Tim_GTi
alexperkins wrote:Ideally, youd make the middle grille smaller to allow a better curve for the black. Thats how the new ones pull it off so well
I concur

Posted: Fri Sep 05, 2008 6:18 pm
by Rossco
Some good attempts there guys!!
I seen some Green 5-Door SDi with the same idea yesterday..
To be honest, it looked
GASH!!
Looks too "Saxo / Max Power" style!
Think its a no, just stick to the usual Smooooving

Posted: Sat Sep 06, 2008 6:43 pm
by Tim_GTi
Just let me know if you want that number mate
