UK-POLOS.NET - THE VW Polo Forum

Posted: **Thu Feb 05, 2009 4:00 pm**

sounds good mate, always nice to be a role model too haha

Posted: **Thu Feb 05, 2009 4:04 pm**

Lol...

How tight are the 312's behind the standard wheels ??

Posted: **Thu Feb 05, 2009 6:36 pm**

well the PD160 Turned up at seat today:

Will give fitting that ago tyomoz if I get time.

Posted: **Thu Feb 05, 2009 6:47 pm**

nice and close

behind 16's

behind 17's

Posted: **Thu Feb 05, 2009 6:57 pm**

Cheers Jeff.. Hope to have them here next week as some of the parts are on back order!

Posted: **Thu Feb 05, 2009 8:33 pm**

bite another bullet... order the rear 256mm vented aswell.. makes braking lovely and balanced...

If you can remove the ecu and send to me then Stage 1 is available for ??? I was going to say free but loads of guys on here have paid £150.. so perhaps you could send some genuine 312mm discs and pads over ????

just a thought ... hehehe

Best regards J

PS... lots more-BHP is also no problem for the Rocco

Posted: **Thu Feb 05, 2009 8:50 pm**

Lol.. Free sounds good or even exchange for some parts ...lol

I was thinking of go9ing for a revo re-map at the same time as my mate as he will be getting his leon mapped once hes fitted his emliminator GT kit to it

Posted: **Thu Feb 05, 2009 11:14 pm**

whilst you work at vw, can you get me a price on the 256 mm anniversary mk4 calipers and carriers, hoses and the 256 mm disks too

and also a sirroco aerial too

cheers

by the way, you have pm

Posted: **Sat Feb 07, 2009 10:09 am**

Jeff will get them sorted

Fitted the pd intake this morning:

Standard:

PD160/ Stanadard:

PD1650 Fitted:

Posted: **Wed Feb 11, 2009 6:36 pm**

Springs have arrived from Germany:

Hope to get these and the brakes on this weekend all being well. (as long as the rest of the brakes turn up!)

Posted: **Fri Feb 13, 2009 2:21 pm**

Well finally al the barkes have arrived at work. So I hope to get these fitted with the springs on saturday.. Then next on the list is the full Miltek, front moutn and then Re-Map

Dave

Posted: **Sat Feb 14, 2009 6:18 pm**

Well today manged to get the bits on.

The brakes before:

The Brakes now :

The ride height before

The ride height after:

And a few new and old pics:

Hope to get some more bits at the end of the month

Posted: **Sat Feb 14, 2009 7:45 pm**

They fill the standard alloys great. Do you know if that set up would fit the 1.4 16v 100bhp? I dont like the look of my standard brakes through my comps lol

Posted: **Sat Feb 14, 2009 7:50 pm**

Not sure about that mate.. I may be sellinhg my gti set up soon not sure yet though

Posted: **Sat Feb 14, 2009 9:15 pm**

can you change the brakes without uprating anything else?

as i might get the 312mm setup before the milltek

UK-POLOS.NET - THE VW Polo Forum

Another Newbie Updated 16/04/2009 More-Bhp'd..;)

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 5/02/2009

Re: Another Newbie Updated 11/02/2009

Re: Another Newbie Updated 11/02/2009

Re: Another Newbie Updated 14/02/2009

Re: Another Newbie Updated 14/02/2009

Re: Another Newbie Updated 14/02/2009