UK-POLOS.NET - THE VW Polo Forum

HOLY t**s... THE NOISE OF THE CAR AND THE BLOW OF VALVE MIXED IS UNBELIEVABLE

whitegtipolo wrote:Probably minimal the standard filter is a very good design just looks lol best power increase will be remap

Ok thanks backs up what I have read. Looking forward to hearing about the re-map.

whitegtipolo wrote:

Edi30 wrote:Great pics and fun vid with all that noise! Please can you let me know where you get your interior LEDs? Also does your induction kit have a cold air pipe or air box to make the most of it?

All the led are push type side light bulbs inside 501 wedge get any led of this type also the number plate lights too. No worries on polo of bulb warning either

Have tried to replace the sidelights with LED 501's but when I put them in I got a bulb warning so you need to ensure that you have the LED's with resistors built in.

Edi30 wrote:

whitegtipolo wrote:

Edi30 wrote:Great pics and fun vid with all that noise! Please can you let me know where you get your interior LEDs? Also does your induction kit have a cold air pipe or air box to make the most of it?

All the led are push type side light bulbs inside 501 wedge get any led of this type also the number plate lights too. No worries on polo of bulb warning either

Have tried to replace the sidelights with LED 501's but when I put them in I got a bulb warning so you need to ensure that you have the LED's with resistors built in.

Yes you will do for a minute turn off ignition and back on then goes away, also my hid have no resistors in and no warning bulb on dash it does come on if no bulb present at all ie open circuit even my number plate ones have no resistors just cheap eBay items ?

Tried that and started the car but still had warning light on dash I have changed them for ones with resistors and will fit them tomorrow

Not had any problems with my sidelights since changing them
Was installing you hid kit simple..?

Edi30 wrote:Tried that and started the car but still had warning light on dash I have changed them for ones with resistors and will fit them tomorrow

Do you have high line display?

Silva1 wrote:Not had any problems with my sidelights since changing them
Was installing you hid kit simple..?

Remove lights and you have to modified the bulb holder

Was afraid you was going to say that, thanks anyways
Gonna give it a shot while i have time

Silva1 wrote:Was afraid you was going to say that, thanks anyways
Gonna give it a shot while i have time

Lights are easy to remove same its easy to do bulb holders any probably ask me

whitegtipolo wrote:

Edi30 wrote:Tried that and started the car but still had warning light on dash I have changed them for ones with resistors and will fit them tomorrow

Do you have high line display?

Yes I do have the Highline display. Fitted the LEDs with resistors but I get a bulb warning but only when the engine is running?! Does not come up when I turn the ignition on and lights are on? Any ideas?

Is the bulb warning in the mfd or just a light in the ref counter like a bulb I have no resistors in any even have led fog bulbs

whitegtipolo wrote:Is the bulb warning in the mfd or just a light in the ref counter like a bulb I have no resistors in any even have led fog bulbs

The bulb warning is a yellow bulb sign on the rev counter. No warning showing on MFD.

Yup same as mine that maybe led in wrong way? Mine is fine had that illuminate on mine when there was no bulb in. If no bulb in and you turn it on it will turn off that circuit untill you cycle the ignition. So try bulb one way then ignition on turn lights on.if not turn off ign turn round and back on

Yup same as mine that maybe led in wrong way? Mine is fine had that illuminate on mine when there was no bulb in. If no bulb in and you turn it on it will turn off that circuit untill you cycle the ignition. So try bulb one way then ignition on turn lights on.if not turn off ign turn round and back on