Page 2 of 3

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Jan 26, 2011 1:07 am
by bstardchild
Endi_GTI wrote:Looking good mate, Like the wheels a lot.
I wasn't sure if it was gonna be a horrible error but they turned out good - I think
Endi_GTI wrote:However looking a bit high up on them :(
Height adjustment not far away :wink:

Not Slammed just not quite so scared of the road :lol:

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Jan 26, 2011 8:27 am
by Endi_GTI
Glad to here it :)

I have just done mine and it looks so much better. Im not into the slammed look either but a slight drop makes a huge difference and the handling is awesome :)

Re: BC's 6N2 GTi (WIP Thread)

Posted: Sun Jan 30, 2011 11:25 pm
by bstardchild
Was a Pistonheads local run out today

Thread here

http://www.pistonheads.com/gassing/topi ... unday+30th

Couple of Polo pics

BC in car clean shocker :shock:

Image

Image

Image

Image

Image

Image

Rest of the pics are here

http://s108.photobucket.com/albums/n19/ ... an%202011/

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 12:25 pm
by 6N2 GTI 00
Looking Good Mate :D

Your GTI is crying out for some lowering springs though, either that or coilovers.

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 2:33 pm
by neilGTI
deffo needs slamming, would make it look a lot better IMO

Still any GTI is a good looker in my eyes :D

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 3:00 pm
by bstardchild
No coilovers and no slamming - been there done that and not impressed........

but I have a set of lowering springs lined up :lol: So height correction will be carried out before the summer :wink:

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 3:52 pm
by 6N2 GTI 00
What springs have you got line up? The Eibach Sportlines give it a nice drop and only cost just over £100

The "slammed" look does look awesome though 8) just its not very practical for everyday driving

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 8:14 pm
by bstardchild
6N2 GTI 00 wrote:What springs have you got line up? The Eibach Sportlines give it a nice drop and only cost just over £100
I'll find a picture of them on the donor car
6N2 GTI 00 wrote:The "slammed" look does look awesome though 8) just its not very practical for everyday driving
Roads aren't getting better - it's pothole city round here and where there aren't potholes there are speed bumps etc

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 10:08 pm
by Bradley
Forget slamming it dude,a nice 40-50mm drop will have it looking comfortably low and keep practicality up.If you go too low you end up looking like a prat when you can't get into your local Tesco over the speed humps and it also makes less drivable.

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 10:35 pm
by bstardchild
6N2 GTI 00 wrote:What springs have you got line up? The Eibach Sportlines give it a nice drop and only cost just over £100
Bradley wrote:Forget slamming it dude,a nice 40-50mm drop will have it looking comfortably low and keep practicality up.If you go too low you end up looking like a prat when you can't get into your local Tesco over the speed humps and it also makes less drivable.
Springs are off this one

Image

40-50mm suits me just fine

Anyway couple more pics from the Pistonheads run - not ones I took

Image

Image

I'm really pleased with how the wheels turned out :lol:

Re: BC's 6N2 GTi (WIP Thread)

Posted: Wed Feb 02, 2011 10:42 pm
by Dom_
Ew Saxo :lol: Wheels look spot on though, will look perfect when lowered

Re: BC's 6N2 GTi (WIP Thread)

Posted: Thu Feb 03, 2011 8:51 am
by 6N2 GTI 00
Those springs should give it a nice drop, that other GTI is running 16" RXII's though which makes the car look lower than it actually is

Re: BC's 6N2 GTi (WIP Thread)

Posted: Thu Feb 03, 2011 11:06 am
by bstardchild
6N2 GTI 00 wrote:Those springs should give it a nice drop, that other GTI is running 16" RXII's though which makes the car look lower than it actually is
Same rolling radius on the wheel so I can't see how that's the case - when I went from 13's to 15's on my old 6N Polo 1.4 CL - the arch gap looked bigger on 15's than it did on 13's - same rolling radius on the tyres - so I would have expected the reverse to be true when comparing same car on 16's v 15's RX2's :?:

Re: BC's 6N2 GTi (WIP Thread)

Posted: Thu Feb 03, 2011 1:56 pm
by 6N2 GTI 00
The 16" RXII's work out 1.1% larger overall which is nothing but when I'm running 16" rims my car does look lower.
I'm not saying it is lower it just looks lower with the bigger wheels, the larger rims visually fill the arches better.

Re: BC's 6N2 GTi (WIP Thread)

Posted: Sat Feb 12, 2011 9:07 pm
by Si_GTi
bstardchild! Long time no see! I was quite surprised (and pleased) to see that you've popped back up on uk-polos :D

Car looks good - just as you've bought your black GTi, I'm about to sell mine :shock: