Page 2 of 8

Re: New member with 6R Polo GTi

Posted: Tue Mar 08, 2011 9:06 pm
by Blaade
HID,s and LED side lights fitted

Image

Re: New member with 6R Polo GTi

Posted: Tue Mar 08, 2011 10:25 pm
by Edi30
What type if LED's did you fit and where did you get them from? When I tried to fit LED's I just got bulb warnings :(

Re: New member with 6R Polo GTi

Posted: Wed Mar 09, 2011 9:48 am
by Blaade
These are what i have, perfect up to now.

http://www.hids4u.co.uk/can-bus-sidelig ... w-led.html

Re: New member with 6R Polo GTi

Posted: Wed Mar 09, 2011 9:56 pm
by Blaade
LED,S only
Image

Re: New member with 6R Polo GTi

Posted: Wed Mar 09, 2011 10:10 pm
by Tyler Owen
Look smart do them, but 15 quid for some 501's !!! :shock:

Do they at least come with some KY ??

Re: New member with 6R Polo GTi

Posted: Wed Mar 09, 2011 10:27 pm
by Blaade
Tyler Owen wrote:Look smart do them, but 15 quid for some 501's !!! :shock:

Do they at least come with some KY ??
Comes down to £11.49 delivered when you use the discount code STRATHY :D

Re: New member with 6R Polo GTi

Posted: Thu Mar 10, 2011 11:07 am
by Edi30
Blaade wrote:These are what i have, perfect up to now.

http://www.hids4u.co.uk/can-bus-sidelig ... w-led.html
Thanks for the link. I tried some LED's I bought locally with and with out can-bus and got bulb warnings so had to take them back.

Re: New member with 6R Polo GTi

Posted: Fri Apr 22, 2011 8:22 pm
by Blaade
For those interested in a Milltek exhaust you shouldn,t have long to wait.

Image

Image

Re: New member with 6R Polo GTi

Posted: Sat Apr 23, 2011 11:34 am
by whitegtipolo
Fair play to you but im not happy with miltek as i have emailed them countless times since november and they keep saying no plans.i even offered my car for development and they just fobbed me off :-(

Re: New member with 6R Polo GTi

Posted: Mon May 09, 2011 7:03 pm
by Blaade
Milltek Turbo back exhaust now fitted.

Image

No middle box so should be nice and loud

Image

Spoke to VWR today. ITG intake fitted, flow rate testing tomorrow, then onto the Intercooler, Engine mounts, Big brakes and Suspension/ARB,s

Re: New member with 6R Polo GTi

Posted: Mon May 09, 2011 7:15 pm
by tt509
nice mate

Re: Blaade,s 6R Polo GTi - now with Milltek

Posted: Thu May 12, 2011 3:41 am
by auspolo
nice one...any sound/youtube clips?

Re: Blaade,s 6R Polo GTi - now with Milltek

Posted: Thu May 12, 2011 9:31 am
by Blaade
auspolo wrote:nice one...any sound/youtube clips?
As soon as i get he car back i will sort something.

Progress at last

Posted: Fri May 20, 2011 9:56 pm
by Blaade
Picked up the car today from VWR. Car has Milltek Turbo back exhaust now. VWR Spring kit and Revo stage 1 software. Big brakes, Engine mounts, ARB,s, Coilovers, ITG Intake and Intercooler will be fitted once manufactured to VWR,s exacting standards.

Car sits nice now, should have come out of the factory like this imo. Not too low for all the speed bumps. On tick over the car has a much more purposeful sound. Once on the move the cabin noise, although louder is pleasing to the ear. Had a little run through the gears 4th to 7th in Sport mode and its truly ballistic in the way it eats up the revs. The car lets out a proper bang on each change. It definately would benefit from an intake as you can hear the filter gulping in the air on full throttle. Averaged 44mpg as well so very pleased with the first stage in the grand plan. Pro Race 1.2,s going on next week.

A few photo,s.

Image

Image

Image

Image

Image

Re: Blaade,s 6R Polo GTi - now with Milltek

Posted: Fri May 20, 2011 10:00 pm
by NMavs
Looks awesome that pal. Any chance of a vid to hear what that baby sounds like :-)