Page 2 of 3
Re: Polo 6R Stalk set Trip Computer
Posted: Tue Feb 25, 2014 7:55 am
by cabbage_gti
Thanks alot that would be much appreciated
Its a 2010 Polo TDI
Re: Polo 6R Stalk set Trip Computer
Posted: Tue Feb 25, 2014 9:33 am
by Eddie-gt
cabbage_gti wrote:Thanks alot that would be much appreciated
Its a 2010 Polo TDI
you will need a stalk set that starts with 6Q0
Re: Polo 6R Stalk set Trip Computer
Posted: Tue Feb 25, 2014 5:28 pm
by cabbage_gti
Really?
Mine is a Polo 6R, seems odd that it would have a 6Q part number?
Anyway assuming I can get hold of the stalk is the installation just the same? 3 wires and coding? Did you say you had the wiring diagram handy?
Re: Polo 6R Stalk set Trip Computer
Posted: Tue Feb 25, 2014 11:07 pm
by Eddie-gt
cabbage_gti wrote:Really?
Mine is a Polo 6R, seems odd that it would have a 6Q part number?
Anyway assuming I can get hold of the stalk is the installation just the same? 3 wires and coding? Did you say you had the wiring diagram handy?
6Q0 relates form 2009 - mid 2012
6R0 is for end 2012 - onwards
You can fit the 6R0 but then you need to change the slip ring too
Re: Polo 6R Stalk set Trip Computer
Posted: Wed Feb 26, 2014 5:44 pm
by cabbage_gti
Eddie-gt wrote:cabbage_gti wrote:Really?
Mine is a Polo 6R, seems odd that it would have a 6Q part number?
Anyway assuming I can get hold of the stalk is the installation just the same? 3 wires and coding? Did you say you had the wiring diagram handy?
6Q0 relates form 2009 - mid 2012
6R0 is for end 2012 - onwards
You can fit the 6R0 but then you need to change the slip ring too
What kinda price is the slip ring? That sounds like it should be cheap but you never can tell. I've had a look on fleebay for the 6Q part and can only find the ones WITHOUT the trip computer but there are a few with the 6R0953521A part number. Do you by any chance have the part number of the slip ring? and then I will need the pin outs so I can wire it up
Thanks alot for you help
Re: Polo 6R Stalk set Trip Computer
Posted: Wed Feb 26, 2014 7:56 pm
by Eddie-gt
Slip ring
Without ESP = 6R0 959 653
With ESP = 6R0 959 654
Re: Polo 6R Stalk set Trip Computer
Posted: Thu Feb 27, 2014 6:18 pm
by greypolo9n3
Ed ive sent you a pm about my cruise. sorry to knob in on this thread, not sure if its been sent to you
Re: Polo 6R Stalk set Trip Computer
Posted: Thu Feb 27, 2014 7:27 pm
by Eddie-gt
greypolo9n3 wrote:Ed ive sent you a pm about my cruise. sorry to knob in on this thread, not sure if its been sent to you
replied
Re: Polo 6R Stalk set Trip Computer
Posted: Sun Mar 09, 2014 5:17 pm
by Eddie-gt
Bump
will also include the 3x wires to make it work and instructions
I fitted a stalk set with cruise
adding the 3x wires and coding = working trip computer controlled by stalk
Re: Polo 6R Stalk set Trip Computer
Posted: Tue Apr 08, 2014 3:59 pm
by Eddie-gt
bump
Re: Polo 6R Stalk set Trip Computer
Posted: Fri Apr 11, 2014 10:14 pm
by Roundsquare
Ed I'll take this if it will work with my daughters Polo 6R 2012 and you give me a rough idea on how to fit it before I buy it. Just to see if I will be able to do it or if its destined to end up just sitting in my toolbox for a few years!
From VCDS I have:
Address 17 gives me 6R0 920 960 G
Posted: Thu Apr 17, 2014 10:09 pm
by Roundsquare
Bump
Sent from my GT-I9305 using Tapatalk
Re: Polo 6R Stalk set Trip Computer
Posted: Tue Apr 22, 2014 8:05 pm
by Eddie-gt
follow the guide to take the wheel off, and take the stalk off
http://www.uk-polos.net/view ... 10&t=54171
insert 3x wires in the plug and 3x wires in the cluster plug
Re: Polo 6R Stalk set Trip Computer
Posted: Fri May 02, 2014 9:22 pm
by Roundsquare
Sorry I had totally forgot about this.
Cheers Ed, the guide seems easy enough to follow but what plug and what cluster plug?
Re: Polo 6R Stalk set Trip Computer
Posted: Fri May 09, 2014 2:46 pm
by Eddie-gt
Roundsquare wrote:Sorry I had totally forgot about this.
Cheers Ed, the guide seems easy enough to follow but what plug and what cluster plug?
you fit 3x wires in the plug on the steering column
The cluster is removed and the plug which plugs into the cluster is where the wires go