Page 2 of 2
Re: Instrument Cluster swap, need information
Posted: Thu Oct 16, 2014 2:41 pm
by 6RKent
Is this procedure of swapping clusters a simple case of plug and play? Or do you need to re-code the new one with the mileage etc.?
Thanks
Re: Instrument Cluster swap, need information
Posted: Fri Oct 17, 2014 8:57 pm
by Ugabista
Hello everybody.
Firstly, I want to congratulate for the excellent forum to have here
I have thought of changing my cluster to an MFA +, but my car is a diesel, with the 1.6TDI engine 90hp. Is it possible? I've read somewhere that the Amarok TDI gives someone confirm?
Thanks in advance
Re: Instrument Cluster swap, need information
Posted: Sat Nov 15, 2014 11:58 pm
by Ugabista
Nobody knows
Re: Instrument Cluster swap, need information
Posted: Sun Nov 16, 2014 10:01 am
by v896
Can be done but it is very expensive depends on how long you will be keeping the car for
Re: Instrument Cluster swap, need information
Posted: Mon Nov 17, 2014 10:56 pm
by Ugabista
v896 wrote:Can be done but it is very expensive depends on how long you will be keeping the car for
Yes of course, but I want to know is if it is Plug & Play the Instrument Cluster Vw Amarok TDI: 2H0920871AX in my 6R 1.6TDI CAYB Confortline 2009...
Thanks
Re: Instrument Cluster swap, need information
Posted: Tue Nov 18, 2014 8:44 am
by v896
As I understand its not just a simple plug in play its requires coding from VCDS software.
Re: Instrument Cluster swap, need information
Posted: Thu Nov 20, 2014 9:20 pm
by jakobb
Hi,
Fitting a Amarok cluster is not straight forward, but almost. You need to need to modify the eprom to have wheel circumference, braking fluid floater, fuel gauge and pictogram fit the Polo. But it can be done:
Re: Instrument Cluster swap, need information
Posted: Fri Nov 21, 2014 11:40 am
by ciclo
Great news for owners of POLO 6R TDI.
I guess in the POLO 6R all parameters will be established with the
function guided of VAS 5054. (diagnostic tool VW)
full image
Re: Instrument Cluster swap, need information
Posted: Fri Nov 21, 2014 6:51 pm
by jakobb
Hi,
The eeprom has to be edited, with suiting software. There are no guides to do this, currently only potatodog has the tools and needed custom eprom.
Re: Instrument Cluster swap, need information
Posted: Sat Nov 22, 2014 5:13 am
by ciclo
Ok... thank you very much for the info.
potatodog, Where? Germans forums?
For those who may be interested, do you have a link to contact?...
regards
Re: Instrument Cluster swap, need information
Posted: Wed Dec 03, 2014 10:56 pm
by Ugabista
Do you have a link that forwards?
Greetings
Re: Instrument Cluster swap, need information
Posted: Sun Dec 21, 2014 11:14 pm
by Ugabista
I read somewhere that this will give the 1.6TDI the 6R ...
http://www.carsystems.pl/polo-6r-instru ... id487.html
Re: Instrument Cluster swap, need information
Posted: Sun May 14, 2017 11:00 am
by smg_shardul
i want to swap instrument cluster anyone have idea how to swap?
Re: Instrument Cluster swap, need information
Posted: Mon May 15, 2017 8:45 am
by govindsharma
Good Afternoon all of you how wants to swap Instrument Cluster.I will tell you steps that needs to swap cluster from lowline to highline GTI.
1. Step one to transfer data from old cluster to new like Km driven service record etc.
2.Step second which is very important must be done in VW service center is online coding of key with immoblizer.Whole process takes about 7 to 10 minute.If vw personel are friends than it will be done in no cost otherwise they will not do this job.In this step data from vw server is taken and feeded to new cluster so that key work otherwise car will not start.