UK-POLOS.NET - THE VW Polo Forum

Posted: **Sat May 05, 2018 1:00 pm**

Posted: **Sat May 05, 2018 1:01 pm**

That’s the only photo I could find of mine. You should be able to work out where i routed it via though

Posted: **Sat May 05, 2018 1:45 pm**

Yeah I tried that one aswell I've just been struggling to remove the grommet. It's a lot harder than the first one. What's the best method?

Posted: **Sat May 05, 2018 1:49 pm**

Squeeze and pull though I have a feeling a pierced a hole in it and siliconed it up

Posted: **Sat May 05, 2018 1:51 pm**

I've removed it but the grommet looks designed to just hold one wire. So how do I protect the second wire from rubbing against the metalwork?

Posted: **Sat May 05, 2018 1:53 pm**

Post some more photos if you can

Posted: **Sat May 05, 2018 1:55 pm**

Posted: **Sat May 05, 2018 1:56 pm**

What if I was to slit it open one side and wrap it round both wires then just push it back into the hole. Would something like that work?

Posted: **Sat May 05, 2018 1:57 pm**

That’ll work. Do that

Posted: **Sat May 05, 2018 1:58 pm**

Okay I'll give it a go thanks for your help. I'll post later to let you know how it goes.

Posted: **Sat May 05, 2018 6:42 pm**

Took a while but I got it all sorted and wired up in the end. Cheers for your help Alex. Much appreciated.

Sub power cable through firewall