Page 2 of 3
Posted: Wed Dec 15, 2004 8:43 pm
by carmadaaron
DJ wrote:1. Remove the tube on the right side
2. Remove the engine cover...
3. turn the cover up side down..
4. Loosen the screw (From no. 1-11)
5. open the Lid..
then replace the filter
DJ, what do u mean by no. 1-11?
thx
Aaron
Posted: Mon Dec 20, 2004 4:51 am
by DJ
Scew no...
The engine box have marks indicating the no of the screw
Posted: Sun Jan 02, 2005 4:22 pm
by vwclub.gr
I've chosen this Simota's induction Kit
I'v noticed a better responce while accelerating and a nise moan while speeding. Sorry for my bad English, I tried my best!
Posted: Sun Jan 02, 2005 4:28 pm
by logistix
that looks like its taking in the hottest air available? correct me if i'm wrong.
by the way, welcome to the forum
Posted: Sun Jan 02, 2005 4:49 pm
by vwclub.gr
Thanx for the welcome, and you would be right, if I hadn't installed a pipe from the hole you see on the left of the induction kit, to the front for some cool air. Sorry that I did't post some pics with the kit finished.
Posted: Sun Jan 02, 2005 6:00 pm
by vwclub.gr
That's what I mean:
Posted: Sat Jun 25, 2005 10:27 pm
by tom-polo53
ordered one of the k&n drop in filters today!
has anyone put a ecotek boost valve on there 9n??
if so, does anyone know whereabouts it goes?
any good?
thanks!!
Posted: Sat Jun 25, 2005 10:35 pm
by carmadaaron
ive heard that those ecotek valves are a waste of time and money,
Posted: Sun Jun 26, 2005 12:18 pm
by mfa-polo
Im also intreseted in getting a replacement air filter or cold air kit for my 1.9 tdi. Am I correct in thinking that the BMC CDA kits are for track use only? Has anyone fitted one?
Posted: Sun Jun 26, 2005 12:27 pm
by carmadaaron
mfa-polo wrote:Im also intreseted in getting a replacement air filter or cold air kit for my 1.9 tdi. Am I correct in thinking that the BMC CDA kits are for track use only? Has anyone fitted one?
thats on a 1.9 TDI i believe
Posted: Sun Jun 26, 2005 5:24 pm
by logistix
mfa-polo wrote:Im also intreseted in getting a replacement air filter or cold air kit for my 1.9 tdi. Am I correct in thinking that the BMC CDA kits are for track use only? Has anyone fitted one?
the stock air intake on your tdi is already a cold air kit! If you want to improve it, you might consider the ibiza cupra intake hose and a drop-in filter. A cold air intake like the BMC will not do much for the tdi.
Posted: Mon Jun 27, 2005 8:24 am
by mfa-polo
cheers logistix, im pretty thick when it comes to engines!
your option would be somewhat cheaper as well
Posted: Mon Jun 27, 2005 8:42 am
by logistix
mfa-polo wrote:cheers logistix, im pretty thick when it comes to engines!
your option would be somewhat cheaper as well
no problem mate. here is a link to a DIY guide for the cupra intake:
http://www.briskoda.net/cms/BRISKODA_Te ... nlet_pipe/
Posted: Mon Jun 27, 2005 11:38 am
by xx_loopy_xx
Not many people make induction kits. Found it really hard to find one!! I know k & n make them but.... dont really want one of those.
I've been told to wait a while until they do make them.
Posted: Mon Jun 27, 2005 11:39 am
by xx_loopy_xx
carmadaaron wrote:ive heard that those ecotek valves are a waste of time and money,
They are....
