UK-POLOS.NET - THE VW Polo Forum

ciclo wrote:

iichel wrote:looks very similar to my car...

But ... From where comes this instrument cluster? 7000-8000 red rpm. BlueGT is from 6000 to 8000 red rpm.

The first time I see on a BlueGT.

Perhaps, he changed only the dial?

Dials from Polo 6R GTI (photo from my friend Krzycho):



Polo 6R with Skoda's dials from German forum:

but in my opinion this dials are uglier


Tuning Plasma custom dials from old Polo:

http://www.ebay.pl/itm/VW-POLO-PLASMA-T ... SwNSxVZwBb

yes got it changed when the car was chiptuned last autumn it was upgraded to 183 horsepower and dsg was tuned

iichel wrote:yes got it changed when the car was chiptuned last autumn it was upgraded to 183 horsepower and dsg was tuned

Which firm made the tuning?

ziptuning in Zeist (Netherlands)

I have to apologize, truly it is the second time I see a instrument cluster like that on a BlueGT.



Forgiveness

By the way... my ring:

That's a WRC tacho Look at speedo, goes to 280. Our GT tachos only go to 240 km/h

Exactly

Hello @ciclo

here im sending you the autoscan results of my Polo..

iam looking forward for your feedback..

i hope you can tell me more about the issue of the Autlight mod and the High Beam failure..


Thursday,26,November,2015,20:29:59:33490
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.3.0 (x64)
Data version: 20140905


VIN: WVWZZZ6RZBY25Rudraksh License Plate: ------



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 6R (6R0)
Scan: 01 03 08 09 15 17 19 25 2E 37 44 56 61 77

VIN: WVWZZZ6RZBY25

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Sporadic communication error 1000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: Malfunction 0010
37-Navigation -- Status: Malfunction 1010
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: Sporadic communication error 1000
61-Battery Regul. -- Status: OK 0000
77-Telephone -- Status: Malfunction 0010

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AK HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 210224E3417200BB842524E782D900521300
Shop #: WSC 00788 648 00255
VCID: 871B6D4732AF66265A7-80D2

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels: 6R0-820-045.clb
Part No SW: 6R0 820 045 G HW: 6R0 820 045 G
Component: Man AC 02 0101
Revision: 0002S 02
VCID: 326D6C936DADB38E5D9-8067

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6R0 937 088 D HW: 6R0 937 088
Component: BCM PQ25 Re4 H46 0322
Revision: BU046001 Serial number: 0379 061110085
Coding: 22B02BBF08E32600B3380FB07FAB8ED1DF80610F7E862041200000000000
Shop #: WSC 00788 648 00255
VCID: 3F8B35A7AEFF6EE6A27-806A

Subsystem 1 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 230913 05 54 0403
Coding: 06302D

Subsystem 2 - Part No SW: 6R0 959 801 AB HW: 6R0 959 801 AB Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 007 1611
Coding: 58BC30

Subsystem 3 - Part No SW: 6R0 959 802 AD HW: 6R0 959 802 AD Labels: 6R0-959-802.CLB
Component: J387__TSG_BT 007 1611
Coding: 48BC30

Subsystem 4 - Part No: 1K8 951 171 A
Component: DWA-Sensor 00 001 0103
Coding: 000000

Subsystem 5 - Part No: 1K8 951 605 B
Component: LIN BACKUP HO H11 9005
Coding: 000000

Subsystem 6 - Part No: 1K8 951 171 A
Component: DWA-Sensor 00 001 0103
Coding: 000000

Subsystem 7 - Part No SW: 6R0 959 811 G HW: 6R0 959 811 G
Component: J388__TSG_HL 007 1611
Coding: 48BC32

Subsystem 8 - Part No SW: 6R0 959 812 G HW: 6R0 959 812 G
Component: J389__TSG_HR 007 1611
Coding: 48BC32

12 Faults Found:
03430 - Terminal 30 for Turn Signals and Brake Lights
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

03435 - Terminal 30 for Interior Light and Parking Light
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 3
Fault Frequency: 89
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:06:14

03080 - Activation for interior lights
006 - Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00100110
Fault Priority: 3
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:45

00959 - Indicator Lamp for Central Locking; Safe (K133)
007 - Short to Ground - Intermittent
Freeze Frame:
Fault Status: 00100111
Fault Priority: 3
Fault Frequency: 9
Reset counter: 184
Mileage: 155375 km
Time Indication: 0
Date: 2051.14.06
Time: 19:04:31

03396 - Supply voltage terminal 30 for central locking
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

00532 - Supply Voltage B+
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

01334 - Door Control Module; Rear Right (J389)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

01333 - Door Control Module; Rear Left (J388)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

01332 - Door Control Module; Passenger Side (J387)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

01331 - Door Control Module; Driver Side (J386)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:00:09

00901 - Back-Up Lamps
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 133
Mileage: 155400 km
Time Indication: 0
Date: 2051.14.07
Time: 06:56:44

01502 - Bulb for Rear Fog; Left (L46)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 144
Mileage: 155685 km
Time Indication: 0
Date: 2051.14.12
Time: 00:01:32


-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10Airbag01M H09 0020
Revision: -------- Serial number: 003GX00GNLRA
Coding: 00314D
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250.rod
VCID: 4A9D1473ED3DDB4E059-801F

Crash sensor for side airbag; driver side:
Serial number: 3575HRB405B0DGES7GO+

Crash sensor for side airbag; passenger side:
Serial number: 3585HRB405B0DGES3GHV

Crash sensor for side airbag; rear driver side:
Serial number: 3515RRB40670G94420OQ

Crash sensor for side airbag; rear passenger side:
Serial number: 3525RRB40670G94480NW

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 6R0 920 861 F HW: 6R0 920 861 F
Component: KOMBI H05 0304
Serial number: 00000000000000
Coding: 550C00
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
ROD: EV_Kombi_UDS_VDD_RM09_VW21.rod
VCID: 38795EBB83D159DE63D-806D

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 6R0-907-530-V2.clb
Part No SW: 6R0 907 530 C HW: 1K0 907 951
Component: J533 Gateway H38 0025
Revision: H38 Serial number: 150211F2002379
Coding: 2500C2
Shop #: WSC 00000 000 00000
VCID: 3363699792B7BA8656F-8066

4 Faults Found:
00381 - Databus Instrument Cluster
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 178
Time Indication: 0

01320 - Control Module for Climatronic (J255)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 178
Mileage: 155535 km
Time Indication: 0
Date: 2051.14.10
Time: 00:04:35

01300 - Control Module for Navigation with CD-Rom (J401)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 169
Mileage: 155157 km
Time Indication: 0
Date: 2051.14.03
Time: 21:15:15

01304 - Radio
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 169
Mileage: 155157 km
Time Indication: 0
Date: 2051.14.03
Time: 21:15:15


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H05 0304
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
ROD: EV_Immo_UDS_VDD_RM09_SE36.rod
VCID: EADD34F30DFDBB4EA59-80BF

No fault code found.

-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels: 5N0-035-342.lbl
Part No SW: 5N0 035 342 D HW: 5N0 035 342 D
Component: SG EXT.PLAYER H13 0150
Revision: A1001003 Serial number: 7669489830
Coding: 020000
Shop #: WSC 00788 648 00255
VCID: 28598EFB5B71C95EF3D-807D

2 Faults Found:
01044 - Control Module Incorrectly Coded
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 185
Mileage: 148191 km
Time Indication: 0
Date: 2047.14.29
Time: 21:23:17

01304 - Radio
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 169
Mileage: 155157 km
Time Indication: 0
Date: 2051.14.04
Time: 09:25:04


-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.clb
Part No: 6R0 423 156 B
Component: LenkhilfeTRW V277
Coding: 11250
Shop #: WSC 00788
VCID: 2F6B65E7EA9F9E66327-807A

No fault code found.

Rud031 wrote:Hello @ciclo

Codings RLS and BCM are right for automatic lights + CH / LH (through fog lamps), so the problem is the wiring.
- Remove, check wires with multimeter, repair if needed (diagram), and install in the right way (guide).

Then clears DTC's and all lights will work properly.
If you need more information, do not hesitate to ask.



---------------------
Important clarification for the rest of the world.
- I not made nor sold this wiring for automatic lights. I only intend to help Rud031 like to many other who sought my help, although they do not bought the wirings that I made...

- All wirings that I made (more than a hundred) are working perfectly and they have lifetime warranty.
- It is well established that the installation support is often necessary, even if you have installation guides.

- Now, I'll make four wirings of automatic lights POLO 6R to registered users, in the same conditions as I made long ago. You can contact me here if you are interested.

Wirings only, without relays and without Auto switch, everyone knows where to buy them at a good price. (read my topic or ask me)
65 € wiring + 10€ shipping cost + support free. Payment by Paypal. The sale will be done in the appropriate forum section.

Thank you ciclo..
1 question:
Can you tell me where i can buy the junior power timer for nr 37 and for nr 1?
And what diameters are the one for nr 37 and for nr 1?
Because if i put the pun in nr37 into the BCM, it takes some strength to pin it.. i think it needs to go more smoother and every time it breaks, putting some strenght on it..

Look here (3. Kontakteübersicht)

Contact terminals
1 MCP 2.8 - Multiple Contact Point - 2,8mm http://www.a4-freunde.com/attachment.ph ... 1415951353
37 MQS - Micro Quadlok System - 0,63mm http://www.a4-freunde.com/attachment.ph ... 1415539780

For wires 0.5mm in thickness, clearly specified in the diagram .

This gentleman [email protected] has all kinds of contact terminals for all model of cars, you can find on eBay or contact him by email specifying the kind contact terminals you need (eg, with pics), in English or German. Great prices and "excellent service", you can be sure.

Rud031 wrote: Because if i put the pun in nr37 into the BCM, it takes some strength to pin it.. i think it needs to go more smoother and every time it breaks, putting some strenght on it..

The key to this is to insert the contact terminal as straight as possible with respect to the connector slot.

The crimp of contact terminal also has to be perfect ...

ciclo wrote: Look here (3. Kontakteübersicht)

Contact terminals
1 MCP 2.8 - Multiple Contact Point - 2,8mm http://www.a4-freunde.com/attachment.ph ... 1415951353
37 MQS - Micro Quadlok System - 0,63mm http://www.a4-freunde.com/attachment.ph ... 1415539780

For wires 0.5mm in thickness, clearly specified in the diagram [img]http://www.bowling-studio.de/gb/images/rtfm.gif[/img] [emoji38] .

This gentleman [email protected] has all kinds of contact terminals for all model of cars, you can find on eBay or contact him by email specifying the kind contact terminals you need (eg, with pics), in English or German. Great prices and "excellent service", you can be sure.

Rud031 wrote: Because if i put the pun in nr37 into the BCM, it takes some strength to pin it.. i think it needs to go more smoother and every time it breaks, putting some strenght on it..

The key to this is to insert the contact terminal as straight as possible with respect to the connector slot.

The crimp of contact terminal also has to be perfect ...

Gracias señor!!

I will contact him and ask for the materials..

This wiring was made by me. I suspect a small short circuit between terminal 15 and terminal 30, causing the engine to stay on after iginition off.
This short was only activated in auto mode and gone if switch was moved from auto to other setting. So no blame on ciclo indeed.

iichel wrote:This wiring was made by me. I suspect a small short circuit between terminal 15 and terminal 30, causing the engine to stay on after iginition off.
This short was only activated in auto mode and gone if switch was moved from auto to other setting. So no blame on ciclo indeed.

I will not put the blame on you also..

I appreciate it the way you made the wiring for me..
Maybe i will retrofit the wiring according to the diagram, but thats not a big deal

iichel wrote:ziptuning in Zeist (Netherlands)

Thanks