UK-POLOS.NET - THE VW Polo Forum

cracking works Yorks, cant wait to see this beast running

Brilliant work Nice to see it being done properly with good quality parts. Absolutely essential for reliability!

You'll soon be showing all these chipped up Golf GTIs and Focus ST's who's boss!

How heavy is the Polo GTI? You'll have an impressive power to weight...

What model of GT30 is it? I've used a GT3071R (0.82 hot side, 4" inlet) in the past (not on my polo) and that was utterly sublime.

I'm toying with going down this route myself, but undecided on 4WD or FWD platform. The 02J is too easy to blow, but I could pop in an 02M from a Leon though..... hmmmm.

let me know what the SPEC clutch is like as I've had trouble with yank clutches chattering really badly in the past.

Cheers

i think i speak for everyone when i say "i hate you, can i have it?" haha, thats pure brilliance.

I hope your planning on showing this car all over the place it'll give everyone a great attitude and thought towards polos.

i want to know it's 0-60 times, it's 1/4mile time and i realy want to see video's of it

hi mate wa did the cup kit cost u, was it straight from the stealers. also when u purchase the bumpers did you buy all the extra bits too. do you know what i should be paying rufly for the front bumper. cheers

zedzo wrote:hi mate wa did the cup kit cost u, was it straight from the stealers. also when u purchase the bumpers did you buy all the extra bits too. do you know what i should be paying rufly for the front bumper. cheers

i got the full kit from the forsale section on this forum payed 400 painted

MarcoPolo wrote:Brilliant work Nice to see it being done properly with good quality parts. Absolutely essential for reliability!

You'll soon be showing all these chipped up Golf GTIs and Focus ST's who's boss!

How heavy is the Polo GTI? You'll have an impressive power to weight...

What model of GT30 is it? I've used a GT3071R (0.82 hot side, 4" inlet) in the past (not on my polo) and that was utterly sublime.

I'm toying with going down this route myself, but undecided on 4WD or FWD platform. The 02J is too easy to blow, but I could pop in an 02M from a Leon though..... hmmmm.

let me know what the SPEC clutch is like as I've had trouble with yank clutches chattering really badly in the past.

Cheers

it weights in at around 1164 std
going with a GT3071R but 0.64 hot and 3inch inlet to help with the spool as its still a 1.8 noth sure how long the gearbox will last only time will tell will upgrade when it dies
it has a very small amount of chatter on the spec but this is due to removing the std flywheel

Turbomier wrote:i want to know it's 0-60 times, it's 1/4mile time and i realy want to see video's of it

will be here when its done

but I could pop in an 02M from a Leon though..... hmmmm.

let me know what the SPEC clutch is like as I've had trouble with yank clutches chattering really badly in the past.

i have broken both with less power in my polo (373bhp/350lb/ft)

o2m boxes aint that tough

just bin reading most of this thread and i love it

Hats off to you for doing this

BIG RHYS wrote:just bin reading most of this thread and i love it

thanks

david burton wrote:Hats off to you for doing this

if it helps you...
i went on a scale with no backseat and about 1/4 fuel, and it weight 1190Kg with me in it.