Endi_GTI's GTI: Typhoon Shlurpie carnage

Godderz23 · Post by **Godderz23** » Thu Mar 10, 2011 9:04 am

Endi_GTI wrote:
Ha ha i know mate, its a mess. Was all clean then had a pasty which went everywhere

Typical Cornish.....

Endi_GTI · Post by **Endi_GTI** » Thu Mar 10, 2011 10:45 am

Godderz23 wrote:Typical Cornish.....

Ha ha (Close to Cornwall, but not quite

)

6N2 GTI 00 · Post by **6N2 GTI 00** » Thu Mar 10, 2011 12:04 pm

Are you a Green Army Fan then matt?

Endi_GTI · Post by **Endi_GTI** » Thu Mar 10, 2011 2:18 pm

6N2 GTI 00 wrote:Are you a Green Army Fan then matt?

Guess so, when i have time to be

My student place in the city is only about 1km away from home park. So can hear most games

JANNERS

Endi_GTI · Post by **Endi_GTI** » Thu Mar 10, 2011 5:07 pm

Finally got my stickers

Cheers Josh

Feel like part of the family now lol

bradley1983 · Post by **bradley1983** » Thu Mar 10, 2011 11:24 pm

Wish I had a sticker

I have a acid damaged car in bits now!!!

6N2 GTI 00 · Post by **6N2 GTI 00** » Fri Mar 11, 2011 8:07 am

Sticker looks cool Matt

nigelelliott394 · Post by **nigelelliott394** » Sun Mar 13, 2011 3:42 am

Nice beading

Verity · Post by **Verity** » Thu Mar 24, 2011 5:34 pm

Sticker looks good
And lovin the 9n3 handbrake cover. Deffinatly something I need to do sometime

nigelelliott394 · Post by **nigelelliott394** » Sat Mar 26, 2011 5:23 am

Does your handbrake cover slide back and forth at all Endi?

Bradley · Post by **Bradley** » Sat Mar 26, 2011 10:36 am

nigelelliott394 wrote:Does your handbrake cover slide back and forth at all Endi?

Mine does if you tug on it.Not during normal use though.

Godderz23 · Post by **Godderz23** » Sat Mar 26, 2011 12:08 pm

So does mine. Only if i pull it pretty hard though.

Endi_GTI · Post by **Endi_GTI** » Sat Mar 26, 2011 9:05 pm

Yeah mine does as well. Only of you yank it on purpose. But it's fine for normal use. It's like the tab is too big and does not locate properly

nigelelliott394 · Post by **nigelelliott394** » Sun Mar 27, 2011 5:38 am

I discovered this when the button slid back and the handbrake cover slid forward... Leaving me confused about how to fix this moving off from a set of traffic lights.

I was worried perhaps I should have left the 9n3 button on it because the 6n2 one almost feels too small. Anyone tried that?

Endi_GTI · Post by **Endi_GTI** » Sun Mar 27, 2011 8:50 am

I did try and fit the 9n3 one as to start with as it looked nice and new. I did this by trimming out the inside to match the standard one. However the button is too long. Even trimming the prongs didn't work. It could possibly work if you cut down the button (with the prongs cut off) and then stick it onto the black button. I may try this and see how it goes. But it doesn't really bother me with it moving slightly.

UK-POLOS.NET - THE VW Polo Forum

Endi_GTI's GTI: Typhoon Shlurpie carnage

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Re: Endi_GTI's GTI

Endi_GTI's GTI

Re: Endi_GTI's GTI