UK-POLOS.NET - THE VW Polo Forum

ciclo wrote:a fast pic.


but I have yet to find the leather I want and other things...

what news?

Did you see this: https://www.facebook.com/photo.php?fbid ... =1&theater ?

CNK, thank you very much for the image, it is very helpful to me.
Still I haven't done anything about it, I'm doing many other things...

ciclo wrote:I'm doing many other things...

Hahah, I'm waiting for results (and photos)

I need that center conxole for my R WRC interior.

Good morning , I am interested in Cycle auto install lighting system.

Can you help me? not to buy the material , your links do not work or are broken .

Thank you!

Byte 29 Bit 6 ... to lin wires in T73b/36 .... ????

I'm having some difficulties but I'm close to getting my new and unheard mod ...
Again, no information is available even in the last diagrams from Elsawin or VCDS.

Ixildu13 wrote:Good morning , I am interested in Cycle auto install lighting system.

Can you help me? not to buy the material , your links do not work or are broken .

Thank you!

Hi Ixildu13,
You have all the information you need here: viewtopic.php?f=62&t=67799&p=506145#p505742 for free.
All links work perfectly.

Hm, let's see. T73b/36 is a lin port.

So let's play 'guess the mod'
- LIN device
- PQ25 compatible but only on T6
- Must be crazy
- First time you do this

I'm guessing... radar guided cruise control?

iichel wrote:Hm, let's see. T73b/36 is a lin port.

So let's play 'guess the mod'
- LIN device
- PQ25 compatible but only on T6
- Must be crazy
- First time you do this

I'm guessing... radar guided cruise control?

Dear İichel,

Do you have any idea about my mod? (Installing ESP switch Button to polo 6c)

I'm waiting your big help :)

iichel wrote:Hm, let's see. T73b/36 is a lin port.

So let's play 'guess the mod'
- LIN device
- PQ25 compatible but only on T6
- Must be crazy
- First time you do this

I'm guessing... radar guided cruise control?

NO.
by the way, you have a small present in your email.

masterofpolo wrote:

iichel wrote:Hm, let's see. T73b/36 is a lin port.

So let's play 'guess the mod'
- LIN device
- PQ25 compatible but only on T6
- Must be crazy
- First time you do this

I'm guessing... radar guided cruise control?

Dear İichel,

Do you have any idea about my mod? (Installing ESP switch Button to polo 6c)

I'm waiting your big help :)

I think it is possible, because some polos have this from factory.
But we need to be careful:
- I don't want to look smarter than ciclo, that would be an illusion
- You have to wire to the ABS unit
- Maybe coding is needed too, I don't know

This is the wiring diagram for ESP button and Tire Pressure reset button, look to the E256 for the ESP button.



Location of the ABS unit:



The brown wire at the bottom is simply the GND. You can splice to another button, the brown wire.
So there goes a wire from the ESP button, pin number 5 to ABS unit with 38 pin connector, pin 22
Furthermore, a wire from fuse 30 to the button pin 4 (you can splice maybe from pin 4 of the tire pressure rest button)
Illumination comes from pin 3, you can take from another button in the dash, i.e. rear window heater, color is grey with blue.

Be careful and I don't know whether is will work...

ciclo wrote:

Code: Select all

   Subsystem 4 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 5 - Part No: 1K8 951 605 B
   Component: LIN BACKUP HO  H11 9005 
   Coding: 000000

   Subsystem 6 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 7 - Part No SW: 6C0 959 442 C    HW: 6C0 959 442 C
   Component: E221__MFL-DC1  H03 0102 
   Coding: B0FFFF

ciclo wrote:

Code: Select all

   Subsystem 4 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 5 - Part No: 1K8 951 605 B
   Component: LIN BACKUP HO  H11 9005 
   Coding: 000000

   Subsystem 6 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 7 - Part No SW: 6C0 959 442 C    HW: 6C0 959 442 C
   Component: E221__MFL-DC1  H03 0102 
   Coding: B0FFFF

Have you managed to get cruise control to work with those buttons?

Do you know someone who has refitted MFSW with CCS buttons on 6R and it is working properly?