UK-POLOS.NET - THE VW Polo Forum

88F has an internal gateway in the bcm I think

PQ25 BCM 088B & 088F at first they were used for BlueMotion models as you know, they do not have the pins T73b/22, T73b/23 (CAN bus diagnosis low, high), so an external Gateway for diagnosis is necessary if these BCM models are installed.

you're right, I mixed something up

ciclo wrote:

federicodrdpro wrote:Thanks Ciclo for the answer! I have a Polo 6R 1.2 TDI not Bluemotion. My BCM is a 6R0 937 087 K version with firmware 0251.
I bought 1K8419091AF steering wheel and 5G0880201J airbag. I don't understand if the 5k0959542 control unit in necessary for the MFSW with 1K8419091AF steering wheel.
I don't see control unit in ETKA 7.5. Can you tell me the wiring links?
For the buttons illumination, I think this is an economic solution: http://www.mk5golfgti.co.uk/forum/index ... #msg999999

P.S. I don't have MFSW in my Polo now.

Federico

.....

Tell us the results. Operation buttons and lighting.

.....

Yes I will write the results!

- A question about the "Rear 12v SOCKET oem"

In ETKA 7.5 the part number of "Rear 12v SOCKET oem" is: 1J0 919 341 . But there are two versions. 1J0 919 341 J and 1J0 919 341 H.
One is for front use and one is for baggage car use. The difference is the openining direction of "door SOCKET".
I want your version:
http://www.servimg.com/image_preview.ph ... u=18061781

Not this:
https://a-a.d-cd.net/560ec5cs-960.jpg

Which is the part number of your Rear 12v SOCKET oem?

EDIT:


Ciclo, What do you think about panic function into key FOB? Panic function is a retrofit in a older Polo.
There are two type of Key, 315MHz and 434MHz. In UE the frequency used is the 434MHz.
The part number of the 434MHz version is: 5K0837202A

-http://www.myturbodiesel.com/threads/ne ... -fob.5742/
- How to new key open: https://www.youtube.com/watch?v=V1snxXcUEXA




Federico

Do you know what is part number of rear 12V socket from Golf 7 Variant baggage:
?

I would like to retrofit a 12v socket in my trunk

CNK wrote:I would like to retrofit a 12v socket in my trunk

I would love to have both sockets in mine.

Mart!n-GTI-DK wrote:

CNK wrote:I would like to retrofit a 12v socket in my trunk

I would love to have both sockets in mine.

I bought inverter but can't find this 12v socket

what about the 3C0919565C for the 230V socket?

CNK wrote:I bought inverter but can't find this 12v socket

federicodrdpro wrote: Which is the part number of your Rear 12v SOCKET oem?

In rear side (cup holder) I used the original 12V socket from front side. 1J0919341H

Just a tip: 12V 'dummy' instead of cigarette lighter --> 7L6919311

ciclo wrote:

CNK wrote:I bought inverter but can't find this 12v socket

Many thanks ciclo! I guess I'll have to install ETKA because http://ifinterface.com/prog/car/prog2/inprog.php is too slow and crashed very often..

federicodrdpro wrote: Ciclo, What do you think about panic function into key FOB? Panic function is a retrofit in a older Polo.
There are two type of Key, 315MHz and 434MHz. In UE the frequency used is the 434MHz.
The part number of the 434MHz version is: 5K0837202A
Federico

5K0837202A ... 315MHz



It is an interesting feature, but I don't like it. I prefer that anybody to get nervous in complicated situations...

... with terrible consequences.

iichel wrote:Just a tip: 12V 'dummy' instead of cigarette lighter --> 7L6919311

There is a lid on the 12V socket iichel. So I don't think that will be a problem.

Yes that's true but my car came with a cigarette lighter and I don't like it. And I don't really want to take out the entire centre console to change the cigarette lighter. :p