UK-POLOS.NET - THE VW Polo Forum

yorks GT TDI wrote:going with a GT3071R but 0.64 hot and 3inch inlet to help with the spool as its still a 1.8

Good choice. That should spool quick. A 0.82 3071R was making 8psi @ 3200rpm on my mate's Evo 9, but that engine does flow lots.

yorks GT TDI wrote:it has a very small amount of chatter on the spec but this is due to removing the std flywheel

Yeah I've got the same issue. 9lb Cromoly flywheel with Helix clutch. Judders a bit pulling away. Can live with it though.

ceedubya wrote:

but I could pop in an 02M from a Leon though..... hmmmm.

let me know what the SPEC clutch is like as I've had trouble with yank clutches chattering really badly in the past.

i have broken both with less power in my polo (373bhp/350lb/ft)

o2m boxes aint that tough

The O2M has gears twice the size of the 02A/J so you're doing well to break that. Do you do 1/4 launching with slicks?
Maybe the 6 pot O2Ms are stronger because I've seen 500whp/tq R32 turbos lay down the power repeatedly with no gear strippage.
Strange it went though. I've been putting 400hp/tq through the 02A in my Corrado daily for 2 years and it's holding fine. Getting clattery mind, but holding

Oh well, maybe I'll rethink the 02M conversion then and maybes go with an SQS gearset instead.

been a while




https://www.youtube*.com/watch?v=ZkSrs_j_OHY
https://www.youtube*.com/watch?v=yLmU8V84zkU

nice!

when will she be finished and driveable?

not too long few small things to do and mapping

Nice!

Simply awesome!

Who's doing your mapping?? ... is it going in soon?

looks like a beast mate! respect for this build!

GTi_dan wrote:Simply awesome!

Who's doing your mapping?? ... is it going in soon?

its at badger5 now for the mapping

thanks for comments guys carnt wait now

some videos will be good

My car will be heading to Bill shortly too. GOt a Ko3 Hybrid going in. Just got a 4 Bar fuel pump to get and am pretty much good to go! Nothing like what you've got tho! Yours will be an absolute beast!!!!!!

Great job!

KennyPOLO_Gti wrote:some videos will be good

My car will be heading to Bill shortly too. GOt a Ko3 Hybrid going in. Just got a 4 Bar fuel pump to get and am pretty much good to go! Nothing like what you've got tho! Yours will be an absolute beast!!!!!!

great stuff i know you said a while ago hes far from you but knows his stuff will be worth the trip

yorks GT TDI wrote:

KennyPOLO_Gti wrote:some videos will be good

My car will be heading to Bill shortly too. GOt a Ko3 Hybrid going in. Just got a 4 Bar fuel pump to get and am pretty much good to go! Nothing like what you've got tho! Yours will be an absolute beast!!!!!!

great stuff i know you said a while ago hes far from you but knows his stuff will be worth the trip

are you havivg a new manifold too kenny

I will be mate. Standard come off anyways. Probably be the INA Mani. More parts coming this week

KennyPOLO_Gti wrote:I will be mate. Standard come off anyways. Probably be the INA Mani. More parts coming this week

INA looks better than the others when are you have it done

Heard they are the best ones to get.

Wont be till after new year mate. With Xmas coming up etc plus had to buy a new TV last week!!! Word of warning to everyone, dont let your G.F/Partners put candles near a T.V!!!!

Hows your Polo going anyways mate???

Kenny