Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri May 20, 2016 7:09 am
so, you need to make another wiring like this.RekinPoznan wrote: ... and add auto switch.
Best Regards Chriss
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝
Page 151 of 332
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri May 20, 2016 5:53 pm
Hello
Ciclo in my model year A I have relay 331 in socket 4 ? and i must use (in your photo) small wire jumper , in this socket is two relays I must remowe left ? and connect pins 3 and 5 toghether.
in fuse box :
34B Split to new wire to T73a/62
39B cut original wire and split to T73b/2
59B cut original wire and split to T73a/2
New wire
39B ---> T73b/68
59B ---> T73A/63
Xenon range unit on the car connected tooday , waiting for leveling sensor only.
The wire T17/3 old now isolated is connected to old DRL (non led) in fog lamps , I use this wire with new relay for new instalation with auto switch (not needed to add new wire T73a/7 ---> T17/8 ---Ne wire Fuse 15A--- FOG) I planned use it with AUTO switch T10/5 ---> relay ---> FOG Right ?
Where is pin for xenon washer pump ? , i have planed wire for this.
Many thanks for understanding (better ask before replace instalation) and best regards Chriss
Ciclo in my model year A I have relay 331 in socket 4 ? and i must use (in your photo) small wire jumper , in this socket is two relays I must remowe left ? and connect pins 3 and 5 toghether.
in fuse box :
34B Split to new wire to T73a/62
39B cut original wire and split to T73b/2
59B cut original wire and split to T73a/2
New wire
39B ---> T73b/68
59B ---> T73A/63
Xenon range unit on the car connected tooday , waiting for leveling sensor only.
The wire T17/3 old now isolated is connected to old DRL (non led) in fog lamps , I use this wire with new relay for new instalation with auto switch (not needed to add new wire T73a/7 ---> T17/8 ---Ne wire Fuse 15A--- FOG) I planned use it with AUTO switch T10/5 ---> relay ---> FOG Right ?
Where is pin for xenon washer pump ? , i have planed wire for this.
Many thanks for understanding (better ask before replace instalation) and best regards Chriss
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri May 20, 2016 8:11 pm
Good work so far!
All wiring corret, remove and bridge relay 331, pin 3 to 5 yes
New wire from T17/3 to T73b/29 (DRL input signal)
Washer supply: T10/1 or T17/12 (auto or non auto light switch)
All wiring corret, remove and bridge relay 331, pin 3 to 5 yes
New wire from T17/3 to T73b/29 (DRL input signal)
Washer supply: T10/1 or T17/12 (auto or non auto light switch)
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri May 20, 2016 8:27 pm
Pics:RekinPoznan wrote:Hello
Ciclo in my model year A I have relay 331 in socket 4 ? and i must use (in your photo) small wire jumper , in this socket is two relays I must remowe left ? and connect pins 3 and 5 toghether.
viewtopic.php?f=56&t=68139#p508917
https://drive.google.com/file/d/0B2nv91 ... RvU2c/viewRekinPoznan wrote:
in fuse box :
34B Split to new wire to T73a/62
39B cut original wire and split to T73b/2
59B cut original wire and split to T73a/2
New wire
39B ---> T73b/68
59B ---> T73A/63
https://drive.google.com/file/d/0B2nv91 ... d6MEE/viewRekinPoznan wrote:
The wire T17/3 old now isolated is connected to old DRL (non led) in fog lamps , I use this wire with new relay for new instalation with auto switch (not needed to add new wire T73a/7 ---> T17/8 ---Ne wire Fuse 15A--- FOG) I planned use it with AUTO switch T10/5 ---> relay ---> FOG Right ?
http://www.servimg.com/view/18943939/296RekinPoznan wrote: Where is pin for xenon washer pump ? , i have planed wire for this.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri May 20, 2016 8:29 pm
T17/11iichel wrote: Washer supply: T10/1 or T17/12 (auto or non auto light switch)
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat May 21, 2016 12:26 pm
Hello
Rewiring done , now DRL LED , and another functions works fine , many thanks for the support
Rewiring done , now DRL LED , and another functions works fine , many thanks for the support
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat May 21, 2016 5:34 pm
Looks really nice. Need a R Line rear bumper. Can not find one with the diffuser on eBay. Only whole kits can be bought. Please help[emoji4]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat May 21, 2016 5:56 pm
New ones aren't overly expensive:
6R6 807 421 CH bumper
6R6 807 568 M diffusor
6R6 807 421 CH bumper
6R6 807 568 M diffusor
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat May 21, 2016 6:22 pm
Thanks to you for sharing.RekinPoznan wrote:Hello
Rewiring done , now DRL LED , and another functions works fine , many thanks for the support
Please make a brief summary of what you've installed and is functioning properly. I do not remember the whole state (installations) of your 6R.
ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun May 22, 2016 4:36 pm
Hi ciclo, I have adopted iichel's solution, and now everything is working perfectly. thanks to both of you.iichel wrote:try like this
[img]http://i.imgur.com/qP0OTBZ.png[/img]
One last question, where you have placed the resistors? because they really heat up!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun May 22, 2016 4:37 pm
Bachecco wrote:Hi ciclo, I have adopted iichel's solution, and now everything is working perfectly. thanks to both of you.iichel wrote:try like this
[img]http://i.imgur.com/qP0OTBZ.png[/img]
One last question, where you have placed the resistors? because they really heat up!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun May 22, 2016 4:40 pm
On the metal of the body. So it can easily transfer heat
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun May 22, 2016 4:43 pm
ok but how they attack? I can use the adhesive? because at that point I can't find holes where tie.
Inviato utilizzando Tapatalk
Inviato utilizzando Tapatalk
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun May 22, 2016 4:46 pm
Duct tape
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon May 23, 2016 6:23 am
Hello, Fernando and everyone!
I've started a facelifting mod to 6C look. Additionally retrofit headlight washers and front PDC.
Next step is 6C headlights and grill retrofitting.
Now question is concerning headlight washer adaptation. What adaptation channels of 09 Cent.Eletr. change washer running time and frequency?
I've started a facelifting mod to 6C look. Additionally retrofit headlight washers and front PDC.
Next step is 6C headlights and grill retrofitting.
Now question is concerning headlight washer adaptation. What adaptation channels of 09 Cent.Eletr. change washer running time and frequency?