UK-POLOS.NET - THE VW Polo Forum

Ciclo,iichel,
To my surprise, i managed to enable rain closing in a 3 doors Polo GTi yesterday and the BCM accepted the code. But, it only works and closes the sunroof. Not the windows. I'll share the autoscan later.


Sent from my iPhone using Tapatalk

benzinkopf, food for thought:
Some time ago I've played with 09centr.electr coding and took some byte values from new polo 6R sedan 2016. With this coding:
22904ABF48E1240093380E00FE8B16F02EC8614F60862055220000000000
I'd found out the rain closing didn't work at all (I don't have the sunroof, only windows)
But with this coding
22904ABF48E1240093380E007ECB16F000C8614F60842055220000000000
It works

The diff in both your codes above:

1. Byte 12, Bit 3 = 0 "Emergency Flashing Turn Signal Active"
2. Byte 13, Bit 2 = 1 "Brake light off with ignition off"
3. Byte 16, Bit 1 = 0 "Emergency brake flashing via brake light active"
4. Byte 17, Bit 5-7 = 0 "no labels for Bit 5, 6. Bit 7="Cruise control installed"
5. Byte 22, Bit 5 = 0 "Assistant Driving Light ADL active"

If VCDS labels are correct, only changes in Byte 17-Bit 5,6 is relevant for Rain Closing to be active.



Sent from my iPhone using Tapatalk

I think, but I'm not sure, that also the RLS coding somehow is involved. I can't remember where I read it though.
Since some people (firegrafik, ciclo, myself) are running a different RLS, the 5K7 955 559, maybe that also is involved?

Heres the autoscan from the 3Doors GTi with sunroof

Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6R0 937 087 H HW: 6R0 937 087
Component: BCM PQ25 H+4 H46 0230
Revision: BF046001 Serial number: 0394 024110738
Coding: 24B029BF08A10000092808003D2B0ED000C0410F60060000200000000000
Shop #: WSC 29698 002 1048576
VCID: 42814528DDB4132E28-8016

Subsystem 1 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 080111 05 54 0403
Coding: 03302D

Subsystem 2 - Part No SW: 6R0 959 802 AB HW: 6R0 959 802 AB Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 007 1621
Coding: 08BC30

Subsystem 3 - Part No SW: 6R0 959 801 AD HW: 6R0 959 801 AD
Component: J387__TSG_BT 007 1621
Coding: 08BC30

Subsystem 4 - Part No SW: 6R0 959 591 A HW: 7P0 959 591
Component: J245 PS72.015 H05 0006
Coding: 081001

Subsystem 5 - Part No SW: 5K0 959 542 HW: 5K0 959 542
Component: E221__MFL-TAS H06 0010
Coding: 830000

No fault code found.


Sent from my iPhone using Tapatalk

how did you get the amarok cluster working in the polo?

jastr wrote:how did you get the amarok cluster working in the polo?

Jastr, u re asking me?
I read somewhere amarok cluster is exactly the same design with polo. So it fits just nice.


Sent from my iPhone using Tapatalk

ciclo wrote:Sport rear springs

Factory measures


Looking for a balance between performance, "comfort" and aesthetics.

My R-line: (without sport chassis -15mm)

Front Axle from factory
L: 355mm
R: 355mm
Rear Axle from factory. Basic rear springs. 6Q0511115CD PR-1JP+0YE
L: 375mm
R: 375mm

The height of the rear axle is horrendous.



With Eibach Pro Kit (for tests)

Eibach Pro Kit Front Axle
L: 330mm
R: 330mm
Eibach Pro kit Rear Axle
L:345mm
R:345mm

Good performance, but my front bumper slashing on the unusually big ramp (hill) of my garage.
I removed and sold it.

And finally and my selected option:

Front Axle from factory.
L: 355mm
R: 355mm
Rear Axle. Sport rear springs. 6Q0511115CK PR-1JS+0YE
L: 360mm
R: 360mm

Lowered -15mm rear axle.
Improves performance of the rear axle, It is very noticeable.



I'm very satisfied with this configuration of springs. Above all it is comfortable.

hi ciclo,
I have a question, I have on my polo the standard springs from factory (1.2 petrol, not TSI), but I want to install r-line springs -15mm.
I must change all springs + shock absorber or the shock absorber is the same of the sport chassis -15mm?
In this case this is the code for my chassis 6Q0511115CK PR-1JS+0YE?

You'll be ok if you only replace the springs and keep the shocks.

thank you iichel,
but the springs are the same for all motorization? On ETKA i have found a lot of codes for it.

on the front axle there are many differences due to the engines having different weights.
on the rear axle the differences are a lot smaller. you basically have the 3-doors and 4-doors (4-doors is heavier, about 40kgs) and the GTI has the battery at the rear.

ciclo wrote:New Mod

Lower grill and fog covers RLine 6C. OEM.

Parts:
Lower grill R-line 6C
6C0853677J 041
Fog covers R-line 6C
6C0853665F 041
6C0853666F 041

PR-041 gloss black from factory







CHE SPETTACOLO!

Upper grill R-line 6C

Hey where did you but this from? I can't find any for sale anywhere

I believe ciclo often buys at http://www.kfzteile-profis.de/

Your car looks great!

Just a though, would polo door modules fit/work in a T5 (2015) to them have mirrors fold on lock?


Sent from my iPhone using Tapatalk