Page 19 of 34
Re: Cornishdrummer's Progress Thread - Seat Update (pg 18)
Posted: Tue May 10, 2011 3:24 pm
by cornishdrummer
Welding has been done
Just waiting for the upholstery to be done.

Re: Cornishdrummer's Progress Thread - Seat Update part2 (pg
Posted: Tue May 10, 2011 9:47 pm
by cornishdrummer
Got my seat back

but there is a bit missing

got to ring them again morro now

My MOT is due on Thursday as well

Cornishdrummer's Progress Thread - Seat Update part3 (pg 19)
Posted: Tue May 10, 2011 10:20 pm
by red6n2
What's missing ?.
Re: Cornishdrummer's Progress Thread - Seat Update part3 (pg
Posted: Wed May 11, 2011 12:22 pm
by cornishdrummer
The part thats joins the lifting handle to the lifting bits to lean the seat forward.
The side which was not welded has been lost.
All the wires are there just the bit that joins the wire to the seat lifter.
That prob makes no sense I will try to find a pic.
The garage dont have the part so they are waiting for the upholstery guy to get back from a job to find out if he has it.
I aint to happy at the moment about it

Re: Cornishdrummer's Progress Thread - Seat Update part3 (pg
Posted: Wed May 11, 2011 7:38 pm
by cornishdrummer
Seats back and in the car
Only prob is the plastic cover of the seat adjustment knob is broke
But my mechanic has just came and checked it over and said its fine as it is
So its going to be picked up morro.
Fingers crossed it will pass

Re: Cornishdrummer's Progress Thread - Last Seat Update (pg
Posted: Thu May 12, 2011 2:44 pm
by cornishdrummer
Got my car back and
It Passed
But I need a strut Mount and my rear breaks need cleaning or something or other.
So not to bad
Edit
Re: Cornishdrummer's Progress Thread - MOT (pg 19)
Posted: Thu May 12, 2011 2:49 pm
by alexperkins
An MOT wouldnt say you need a strut brace mate

Re: Cornishdrummer's Progress Thread - MOT (pg 19)
Posted: Thu May 12, 2011 6:57 pm
by cornishdrummer
alexperkins wrote:An MOT wouldnt say you need a strut brace mate

Strut Mount is it ?
Re: Cornishdrummer's Progress Thread - MOT (pg 19)
Posted: Thu May 12, 2011 7:00 pm
by alexperkins
Possibly
Check the advice form and read it off that

Re: Cornishdrummer's Progress Thread - MOT (pg 19)
Posted: Thu May 12, 2011 7:01 pm
by cornishdrummer
alexperkins wrote:Possibly
Check the advice form and read it off that

Mechanic has it.
Re: Cornishdrummer's Progress Thread - MOT (pg 19)
Posted: Mon May 16, 2011 11:27 am
by cornishdrummer
Just checking Sidelight bulbs are 501s aint they ?
thanks
Re: Cornishdrummer's Progress Thread - Sidelight bulbs (pg 1
Posted: Mon May 16, 2011 11:29 am
by alexperkins
W5W or 501. Depends whos listing them
Re: Cornishdrummer's Progress Thread - Sidelight bulbs (pg 1
Posted: Mon May 16, 2011 11:30 am
by cornishdrummer
alexperkins wrote:W5W or 501. Depends whos listing them
Thank you Alex
Thought I would check dont want to order the wrong ones

Re: Cornishdrummer's Progress Thread - Sidelight bulbs (pg 1
Posted: Tue May 17, 2011 7:54 pm
by cornishdrummer
Just a little update
So my car was picked up this morning to have the strut Mount and my rear breaks cleaned.
Just had the car back and was told.
- My Centre exhaust has part of the system slightly deteriorated
and my rear exhaust also.

Just what I need

Re: Cornishdrummer's Progress Thread - Update (pg 19)
Posted: Wed May 18, 2011 7:35 pm
by cornishdrummer
Not happy once again my black indicators wont fit right once again
I took them out for the MOT (coz they dont fit great) and went to put them back into night but the fitting is really bad, if you put your fingers behind them from the outside you can move the indicators forward.
I have left them out for the moment.
Any ideas please
