Page 3 of 7
Posted: Sun Oct 26, 2008 12:31 pm
by Tim_GTi
Sweet mate, du get that done in welsh coast?
Posted: Sun Oct 26, 2008 1:59 pm
by Trottagti
Im having mine decated this week well tuesday lol, u no if its a long process mate and i take it uv kept the original cat??
Is ur pipercross filter a foam noise maker one???
Id recomend the viper pipercross with the cold air feed pal, then ul see some resluts!
Also isit alot louder with a decat as i have a 3inch backbox single wich is pretty quite considering, isit alot louder???
Posted: Sun Oct 26, 2008 4:03 pm
by Rossco
Tim_GTi wrote:Sweet mate, du get that done in welsh coast?
Yes mate, only took half hour too.
Gareths always quick at things lol
Im having mine decated this week well tuesday lol, u no if its a long process mate and i take it uv kept the original cat??
Is ur pipercross filter a foam noise maker one???
Id recomend the viper pipercross with the cold air feed pal, then ul see some resluts!
Also isit alot louder with a decat as i have a 3inch backbox single wich is pretty quite considering, isit alot louder???
Yh mate original cat is in my garage.
it is the noise making one, but does sound good with the de-cat, just saving up now to get a BMC.
The standard Gti systems iv found quiet grunty anyway, the de-cat has just added a rasp to it, i like it though lol
Posted: Sun Oct 26, 2008 8:19 pm
by Tim_GTi
Any idea what he would charge normally for a de-cat?
Posted: Sun Oct 26, 2008 8:26 pm
by alexperkins
Just remember Tim, you will need a cat for an MOT, or a garage that is a bit lenient towards that modification.
Posted: Sun Oct 26, 2008 8:28 pm
by Tim_GTi
alexperkins wrote:Just remember Tim, you will need a cat for an MOT, or a garage that is a bit lenient towards that modification.
Aye fully aware mate
.. ohh check your PMs!
Posted: Sun Oct 26, 2008 8:29 pm
by Trottagti
How much did ur decat cost dude, just so i get an idea!
M8y at mme garage said hes got a spot tuesday but i never got a price lol!
Posted: Sun Oct 26, 2008 8:35 pm
by alexperkins
Tim_GTi wrote:alexperkins wrote:Just remember Tim, you will need a cat for an MOT, or a garage that is a bit lenient towards that modification.
Aye fully aware mate
.. ohh check your PMs!
Read it just now. As soon as my new mac pro
arrives (in under three weeks) ill burn it for you, as my superdrive has died
Posted: Sun Oct 26, 2008 10:23 pm
by Tim_GTi
alexperkins wrote:
Read it just now. As soon as my new mac pro
arrives (in under three weeks) ill burn it for you, as my superdrive has died
Sweet, cheers mate
Posted: Mon Oct 27, 2008 10:01 am
by Rossco
the de-cat cost me £40, i think its usually around £65 but would still be worth it.
he may be leniant on his prices though.
Posted: Mon Oct 27, 2008 10:03 am
by Tim_GTi
Cool, cheers mate
Posted: Tue Oct 28, 2008 7:55 am
by Overseer
Cool idea. How do you actually remove the cupholder and coin tray?
Posted: Tue Oct 28, 2008 9:31 am
by Rossco
Its a real pain!!
You have to remove the strip of dashbord covering below (you can find one of the points in the glove box and the other near the steering coloumn), underneath them is two back screws for the holder, and there are two screws at the front corners. hey presto shes out. but be careful, if bits fall apart its a real pain to put back together!!
Posted: Mon Dec 08, 2008 9:05 pm
by Rossco
Little update since the last one:
Smmmooooove
thought i would join the smooove gang!!
Comments and thoughts welcome as always!
Posted: Mon Dec 08, 2008 9:33 pm
by JayKay
Loving the smoothed look. Very nice, if you don't mind me asking how much it cost you?
